Quantcast
Channel: Support - Pimoroni Buccaneers
Viewing all articles
Browse latest Browse all 6926

SpeakerpHAT - no sound :(

$
0
0

@MichaelNewham wrote:

Hi folks,

Have looked through the threads - found no obvious workaround / solution in getting my SpeakerpHAT to sing…

I’m running it on a Pi Zero W with latest Stretch-Lite distro. Soldering seems to have gone fine. I installed the ‘one line installer’ and ran ./test.sh.

Output was as follows -

testing audio

speaker-test 1.1.3

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
 0 - Front Left
 1 - Front Right
Time per period = 3.176435

testing basic wav playback

Playing WAVE './test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo

testing text-to-speech


testing VU meter

VU meter works fine, but no sound at all and no heat from the speaker either.

Any suggestions as to where to turn next?

Regards,

Michael

Posts: 2

Participants: 2

Read full topic


Viewing all articles
Browse latest Browse all 6926

Trending Articles