@LittleMike wrote:
Hello all,
After some very helpful advice from support and replacing some parts, I have my 10" Picade up and running. I only have one issue that is bugging me and can’t figure out. I’ve tried reading the forums here and a lot of the information seems to apply to the older model Picade HAT and not the newer X one.
Anyway, here’s my situation:
Raspbian Buster on an RPI 4
Retropie installed on top of that
Completely stock build of the Picade arcade kit, including the 4 ohm speakers and regular buttons, etc.I have sound output in both the Raspbian desktop as well as in games. My problem is I can’t figure out how to change the volume. If I’m in Emulation Station, volume is set to 0% yet I still have sound.
In the Raspbian desktop, I have sound but the speaker icon has a red x and it tells me I have no ALSA controls.
As far as my config.txt goes, I installed the Picade drivers using the one line installation. The only thing I’ve modified from that (because I was getting no sound at all before) was to enable i2s (because the X HAT uses digital audio output) and dtparam=audio=on.
I had this working on a previous build but never backed up my config.txt, so I don’t know what I did. Anyone have a “stock” build like me with Raspbian and working audio in everything? I’d appreciate the help.
Thanks!
Posts: 1
Participants: 1