Clik here to view.
MLX90640 out-of-box glitch, help!
@Disciple wrote: Greetings. First post. Just received my MLX90640 breakout from Mouser. First Pimoroni purchase. I attached the pins and ran the Sparkfun sketches on an Adafruit Feather M0 wired to my...
View ArticleEnviro+ micro support
@lastcaress wrote: So I was wondering how’s the ETA on the support for the microphone MEMS thinggie on the enviro+ The enviro+ is great, and that microphone is actually pretty powerful (I actually...
View ArticlePirate Radio: one-line installer fails - Suite value changed
@kaifly wrote: I’m trying to install the vlcradio code on my Pirate Radio, using the command given in the instructions: curl https://get.pimoroni.com/vlcradio | bash The script downloads correctly and...
View ArticleInky what - own code not running
@CannonFodder wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleEnviro+ LCD not working on Pi Zero W
@jsutton wrote: I’ve done a fresh install of Debain Buster on a Raspberry Pi Zero W and then ran the installation script: curl -sSL https://get.pimoroni.com/enviroplus | bash From what I can see, the...
View ArticleClik here to view.
Hyperpixel 4.0 with cable
@smorgisborg1 wrote: Hi there, I’ve 3d printed a large case for my pi 4.0. I’m looking to connect the display to the pi via a GPIO cable. I have purchased 2 cables so far but the both end up...
View ArticleExplorer HAT Pro on a RPi 3B+ (or 4)
@mikeh123pc wrote: Will the Explorer HAT Pro work on a RaspberryPi 3B+ or 4 ? Thanks in advance Posts: 2 Participants: 2 Read full topic
View ArticlePlayer X USB Dupont to Dupont for Plasma?
@SordosPi wrote: Hi there! I’d like to retrofit my Picade to connect with a PC. Need more oomph, ya know? ;) Looks like the Player X USB board will allow me to do this. So I went ahead and ordered a...
View ArticleClik here to view.
[Scroll pHat HD] Is it possible to make a numbers only custom font?
@ncguk wrote: I want to make a custom 3x11 font containing just numbers and a colon (for a clock). Is this possible, or do I need to make an entire character set? I’ve had a go with this png: and this...
View ArticleRaspberry pi 4 & fanshim
@Guibert wrote: Good afternoon all. I have two pi’s 4, each equipped with a fanshim. Both work as expected with the python scripts that are provided. However, I see a bizarre difference at startup...
View ArticleClik here to view.
Automation phat and raspberry pi zero to run solar powered irrigation system
@thrashmore wrote: Hello everyone, First post on here and first project. I bought a solar powered irrigation system from a vendor on a certain popular website, let’s call it ‘Nile’. It arrived from...
View ArticleSuggested power for touch screen y-cable?
@ratatosk wrote: I got one of your USB power y-cables to use with the 7" touch screen. How powerful should the USB source I plug the y-cable into be to sufficiently run a Pi (say a Pi 4B) and the...
View ArticleClik here to view.
Unicorn Hat HD missing pixels
@pwhitrow wrote: Hello there! I recently purchased a Unicorn Hat HD from yourselves (Order #PI321849). I’ve just got around to testing it by connecting to a Teensy 3.5. All red pixels are fine, all...
View ArticleHyperpixel install err message
@sr_12345 wrote: Hello, after attaching Hyperpixel 4" rectangular to my Pi4 and inputting the command line on your install tutorial I’m given the following message, please help… Checking environment…...
View ArticleFlora GPS on a Nano
@settanta wrote: Hi I have purchased a Flora wearable GPS unit which I have attached to a Nano. I have adjusted the code to put TX as pin 1 and RX as 0 but I am not getting any meaningful output on...
View ArticleMic Sensitivity on ADP009 I/O Dongle
@mickf wrote: What is the sensitivity of the analogue microphone input on the ADP009 I/O dongle? Presumably the dongle contains an ADC so what input voltage (peak) will result in full scale on the...
View ArticleEnviro+ Plotting
@Azazel wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleEnviro + Sensor Data Plotting
@Azazel wrote: Hi Guys, I’m sorry, I’m very new to the python and sensors game :) I’ve recently purchased Enviro+ and would like to plot out the data. How are you guys plotting your sensors outputs? I...
View ArticleFanshim led not showing in some cases on RPi4b
@CypherOz wrote: Hi New here from .au, modded the led.py code from the fanshim examples. The following code runs well in Thonny (python IDE) on Raspbian RPi4b, when I type Ctrl/C the led if left...
View ArticleEnviro+ Homebridge compatibility?
@Noob wrote: Hello, Is Enviro+ Homebridge compatible? If not, is there any plans for support? Thank you Posts: 1 Participants: 1 Read full topic
View Article