Problem with PMW3901
@synd wrote: If i run the motion.py example, i got the following error: Traceback (most recent call last): File “/home/pi/breakout-garden-master/pmw3901/examples/motion.py”, line 21, in flo =...
View Articlefourletter-phat examples countdown.py fails after random time.
@RPIgoodSBC wrote: fourletter-phat examples countdown.py fails after random time. No more than 30 minutes after led goes off. Sometimes at 14 minutes to the end of countdown sometimes about 20 minutes...
View Article7" touchscreen: display OK, touch only works in bottommost pixel row
@felixkasza wrote: Hi! In 2017 or so I bought a 7" official RPi touch screen, and it has served me well, except that touch stopped working. Note that I use lcd_rotate=0 in config.txt – for what I use...
View ArticleClik here to view.
3.5" LCD won't work with Fan Shim
@Silarous wrote: I have a Raspberry Pi 4 4gb with a 3.5" Kuman LCD touch screen. I am running a Raspiblitz Lightning node on the setup and just received a Fan Shim to install on it. For some reason,...
View ArticleMote host without pc? Micropython control
@Djm811 wrote: Is is possible to control mote host using a micro python board such as circuit playground? Anyone done this? If not is it feasible? Would I need to convert write python library. May...
View ArticleI can not make "Four Letter pHAT" work with "Ryanteck Rtk.GPIO"
@Raspiado wrote: Hello, I am a new comer to Python. “Four Letter pHAT” works properly when I attach it to the Raspberry’s GPIO, but it does not work with “Ryanteck Rtk.GPIO”. On a Raspberry I...
View ArticleSparkFun Servo pHAT - battery monitoring
@Stemmi wrote: Hello, I am still very new to the Raspberry/Maker world - forgive if this is a stupid question. I intend to build a robot driven by a Raspberry Pi Zero W and use the SparkFun Servo pHAT...
View ArticleClik here to view.
Microdot pHat wont scroll or flash
@altronic wrote: Hi im having a strange issue with the microdot pHat…I have got it working up to the point of trying to scroll anything or get the clock working…Ive followed all the info here...
View ArticleConnect PMS5003 to Breakout Garden for Raspberry Pi using Particulate Matter...
@pastorcmentarny wrote: Story. I decided to do a little project with Raspberry Pi with Breakout Garden with some sensors, webcam (as a camera for pi does not work). I finished my small project, and...
View ArticleEnviro+ ADS1015 error ADC pin reading
@kflmiami420 wrote: Hello I am trying to read the ADC pin on the Enviro + board Right now the all-in-one-no-pm-2.py is running fine with added modes for temp and press conversion. I wanted to add a...
View ArticleInkywhat display - explanation of sample code?
@gauntface wrote: Hi all, I’m not sure how to phrase what I’m after so please bare with me. I’m looking through the source code for the inkywhat python library with an eye on trying to write a library...
View ArticleKeybow - Keycaps and Switches?
@Madnys wrote: Hi! First time poster, long time fan. I just got my new Keybow, already love it. I do have two small questions though, that I haven’t seen answered elsewhere, so I’m hoping someone here...
View ArticleHyperpixel 4.0 - the *Touch* is NOT working
@bolsoncerrado wrote: Hi there, I’ve installed the latest drivers by following the instructions here https://github.com/pimoroni/hyperpixel4 and while the screen works flawlesly, the touch layer...
View ArticleClik here to view.
Teensy 4 support for Adafruit ST7735
@PhilH wrote: I was hoping to use a Teensy 4 with an Adafruit 2" TFT screen. However, it appears that the Adafruit ST7735 Arduino library has not been updated for the Teensy 4 yet. Are there plans to...
View ArticleUSB Mic not working with Pi Zero W
@Kisty wrote: My new Mini USB Mic from the Pimoroni store (btw thanks! Speedy despatch!) isn’t working with my raspberry pi zero W. Tried doing the arecord -D plughw:1 -f cd /tmp/recording.wav, copied...
View ArticleEnviro+ PM sensor output
@peteboz wrote: Hi All. Just picked up an Enviro+ to connect to my pi zero and PMS5003 PM sensor. I have all the example programs working fine, but for some reason when running the particulates.py...
View ArticleKeybow - Custom Layout
@eXsoR wrote: Hello everyone, I ordered the Keybow and was looking on building the customer layout. Does any one know how to code a 3 key press, example Ctrl+Shift+ESC ? would that be like this? Sorry...
View ArticlePi4 Picade Overheating
@Lamaman1971 wrote: Hi Folks, does anyone have any cooling recommendations for the Pi4 in a PiCade? The HAT obstructs any additional active cooling on the PCB - so anyone else gotten to the bottom to...
View ArticlePlayer x usb firmware
@chalko wrote: I bought https://shop.pimoroni.com/products/player-x-usb-games-controller-pcb Is the software / firmware for it available to modify and or update. I can’t find it on github. And what...
View ArticleMicrobit and automation bit analogue pins
@nickine9 wrote: I am making a motorised touch controlled toy using a microbit and the automation bit. I have successfully enable analog pins 1 and 2 to be touch sensitive but i am having trouble with...
View Article