Inky wHAT Issues
@bikeboardsurf wrote: I have recently purchased an Inky wHAT (yellow), I’ve connected it to a Raspberry Pi Zero W (on a fresh Raspbian -Buster-Lite image, followed the instructions as per the tutorial...
View ArticleBMS280 reading far to low, PMS5003 reading too high
@paih wrote: Hi, as wasn’t successful @ Discord, I try it here as I am really stuck. My enviroplus board is mounted piggy back style on Raspi Zero, th case ist like this one My BMS280 shows much lower...
View ArticleRFID solution needed help to find kit
@Dr_Vector wrote: Dear I am looking for suppliers of RF modules and I hope you help me with choosing the right one. Specifically, I am reaching out to ask about the RFID readers and appropriate...
View Article2m LED stripe/288 Neopixel with Raspi: power source and cable
@lugo wrote: Hello, regarding https://shop.pimoroni.com/products/flexible-rgbw-led-strip-neopixel-ws2812-sk6812-compatible?variant=30260032733267 Two meters of that controlled by Raspberry Pi (3B):...
View ArticlePanTilt HAT with SG90 servo (MIN and MAX values)
@cypresstwist wrote: Hi. I bought the PanTilt HAT (module only) and one of my sevos is a SG90. Does anyone have the MIN and MAX values for this servo to use in my pantilt.py? Thank you. Posts: 9...
View ArticleHeadphone Amp for Raspberry Pi with fbtft
@onkobu wrote: Hi there, I’ve tried to run the Headphone Amp for Raspberry Pi with fbtft (on Raspbian Buster) without any success. I managed to get the modules loaded and instrumented startup sequence...
View ArticleHeadphone Amp for Raspberry Pi only working with Pulse, not with ALSA
@onkobu wrote: When following the guide I can successfully enable audio output for example with mpg123 -o pulse . Without -o something else is chosen and gives garbled output rendering much too fast –...
View ArticleClik here to view.
Enviro+ readings unrealiable
@RemBrand wrote: I got the Enviro+ running with a Raspberry Pi Zero but the data is too unreliable to realistically contribute to a Citizen Science project like Luftdaten.info. It’s a great...
View ArticleAirplay with Pirate Audio Line Out
@whatsnew wrote: Hello, I’m using a Synology NAS as a music server and a bunch of Raspberry Pi as Media renderers. This works well when I install umpdcli on every Raspberry and I can stream different...
View ArticleFan SHIM
@lou wrote: Need help with my newly installed Fan SHIM on my RPi 4; it runs constantly as soon as I apply power, no LEDs. LOU Posts: 4 Participants: 2 Read full topic
View ArticleInky wHAT Slideshow to run on Boot Up?
@stefanwegner wrote: Hi everyone! I sure could use a bit of guidance for how to code this. I have a folder full of images that I want to display randomly and immediately every time the Inky...
View ArticleZero4U wifi interference despite using ferrite ring
@truthorjester wrote: Purchased the Zero4U USB hub for the Pi Zero W (https://shop.pimoroni.com/products/zero4u) and as expected it shipped with the ferrite ring...
View ArticleClik here to view.
LED Matrix chain
@Semiconductor wrote: Newbie question I need to know what additionally I will need to chain LED matrixes. Using a RGB LED Matrix Panel – 32x32 and following the instructions do I need a one “Adafruit...
View ArticleFanShim: Stops regularly but is reported as on and starts again if I...
@vansmith wrote: Hi all, I’ve got a FanShim on a RPi 4. Every once in a while, the FanShim will stop spinning despite the Python lib reporting it as on. If I go “flick it” (for lack of a better word)...
View ArticleDVB-T Dongle - is this the right one for ADS-B?
@Aneng wrote: Hi. I’ve just bought one of these from you; https://shop.pimoroni.com/products/dvb-t-dongle-ideal-for-ads-b-real-time-plane-tracking ADS-B transmissions are on 1090MHz. The package I...
View ArticleHyperPixel4 the worst
@kdiperi wrote: Having such a hard time with this screen… after almost 2 months finally got the screen to stay rotated horizontally and not freeze or lock up . Now the touch calibration have the axis...
View ArticleFanshim: -bash: git: command not found
@piguy88 wrote: Hello all, I am trying to install the fanshim software by pimoroni (following their instructions to the T), but every time I attempt to, i get the following error: -bash: git: command...
View ArticleAdded dual phono connection to phatDac and audio stopped working
@Abovedmc wrote: Had pHAT DAC up and running on zero w with PiMusicBox working perfectly. I decided to add the dual phono connection and soldered it in and now I don’t get audio. Is it necessary to...
View ArticlePicade 10 with heatsink, fan shim and xhat?
@fredrikpj wrote: Hi, So I want to make my Pi4 a bit cooler, so a question regarding if this is possible: Can I: First have a heatsink on (the big one that you make) Add a booster with the fan shim on...
View ArticleClik here to view.
Caibrating Enviro pHAT
@listingslab wrote: In my project PiJS.app, I have the following set up… A python script running every 10 seconds via cron on a Pi. It produces a JSON file which is publicly available via a...
View Article