Picade Console - command line to setup device not working
Hi, I bought a picade console and built it yesterday. Everything seems ok, retropie is booting, but when I try to enter the command line in the terminal to install the software I get an error : curl...
View ArticleEnviro+ with Breakout Board BME 680
Afternoon - I have just soldered a BME680 to the Enviro+ but I’m having issues getting it to run. When i run the example ‘read-all’ i get: File “read-all.py”, line 13, in sensor = bme680.BME680(0x76)...
View ArticleHyperpixel 4.0 - Reboots / Crashes Pi when pressing touchscreen
Describe the bug Screen boots okay and shows Raspbian boot messages as normal and then launches into the OctoDash UI normally with the touch controller working, pressing the touchscreen with all but a...
View ArticlePicade 10" 2020 - issues
Hi, just finished building a picade 10 inch (with a raspberry pi 4), and I have a few issues, so not sure what went wrong as I followed tutorial by the book… I cannot plug a usb joypad or it won’t...
View ArticleIssues with Enviro+ mic
Hello, I’ve got a pimoroni enviro+ card and although almost everything works, I’m not able to get the mic adau7002 (hw:0,0 in my case) to work at all. The arecord command always registers 0 from the...
View ArticleServo phat and explorer phat
hi, a few question…can these (servo and exporer phat) be used at the same time using the 40pin header?. Also, it looks like you can connect the servo phat using a qwiic connector. if that is the case...
View ArticlePirate Audio Amplifier Output Specifications
Hi, The Pirate Audio looks perfect for my Project, but I haven’t been able to find any specifications for the device, in particular the Audio Amplifier Output Specifications. I notice from the Product...
View ArticlePicade hat and Emulationstation not working together
Hello, I have a newly built Picade 10 inch with a Pi 4b and am trying to get it to work using a 32GB or 64GB SD card. With a fresh Retropie 4.6 image on the card (tried this a few times) I can connect...
View ArticleUsing I2S microphone on enviro+
Hi, How can I record audio from the I2S microphone on enviro+? I see here https://github.com/pimoroni/enviroplus-python/blob/master/library/enviroplus/noise.py the function def _record(self): and...
View ArticlePoint a noob in the right direction please?
Hi All, I’ve recently started playing with neopixels and python on an old Pi, inspired by this project: http://www.aoakley.com/articles/2015-11-18-raspberry-pi-christmas-led-matrix.php. and then...
View ArticleReset pin for ST7735 on Enviro+ for Raspberry Pi?
I haven’t been able to find any information about a reset pin for the ST7735 on the Enviro+ for Raspberry Pi. Is there simply no pin connected? 2 posts - 2 participants Read full topic
View ArticleSGP30 Breakout stopped responding
(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) 1 post - 1 participant Read full topic
View ArticleHyperpixel 4 touchscreen detects wrong position
Hello, I just received the hyperpixel 4 touch (rectangular), plugged it in my Raspberry zero WH (running Raspbian), installed the driver, rotated the display to “left” and rebooted. The display is...
View ArticleHow to use multitouch from Hyperpixel 4 in a C program?
Hello, I am using my new HyperPixel 4 with a Raspberry zero running Raspbian. I read Hyperpixel supports multi-touch. Is there a library to get multi-touch information in a C program? Thanks in...
View ArticleEnviro+ code modification help needed
I want to change the scale used from 0.1 vertically per pixel / dot to 1.0 per pixel / dot on the LCD. Code I’m using is at bottom of post. I have two 0.96 SPI Color LCD’s running a modified Enviro+...
View ArticleReSpeaker 2-Mics Pi Hat not working
I purchased a ReSpeaker 2-Mics Pi Hat because I wanted to try out the voice recognition projects like Mycroft but I can’t get it to work. I’ve tried it on a Zero W, 3B, 3B+ and 4, followed the...
View ArticleBad Sound when i enter a emulator
Hi, I have a Problem with my new Picade 10 inch. When i’m at the retropie menu i have great background music but when i enter a emulator the sound is distorted. i’m using a raspberry Pi 4 8GB. This...
View ArticleNo Blinky Blinky- Pi Zero W & Unicorn PHAT
Hey community. Bit of a rPi configuration noob here. My goal- Using a rPi Zero W and a Unicorn PHAT I want get the LEDs to light up. Then use it to indicate when I am in meeting etc at home. Hardware:...
View ArticlePirate Audio - LCD in both Speaker & Lineout does not work
I recently bought it and using it with Raspberry 3B+ / Volumio latest version. Sound is relevantly working but display is not working even though I follow your instructions as below....
View ArticleNo display with LG Ultrawide
I have a Raspberry Pi 4 and it’s plugged into an ultrawide monitor because that’s the only monitor I have which has any HDMI ports. I know that the Pi doesn’t have a resolution option for 2560 * 1080...
View Article