Customs payment to Sapin?
@jimenezignacioo wrote: I am considering buying some stuff from your page, but I'd like to now if there would be any extra customs payment, since you are supposed to be leaving the EU. Posts: 4...
View ArticlePivumeter - change brightness on the fly
@MarcJennings wrote: Is it possible to change the brightness of the LEDs on the Phat Beat vu on the fly? I'd like to make them respond to ambient light conditions (I.e. be dimmed in a darn room,...
View ArticlePhat Beat no sound on left channel
@Yet_Another_One wrote: Finally got around to getting the software up and running however after most of the day scratching my head I've discovered that my left channel doesn't have any sound. Lots of...
View ArticleI2C breakout
@MarcJennings wrote: Hi,What's the best way to put together an I2C breakout board? What I mean is that I would like to have almost an external, 4 track board carrying power and I2C pins for easy...
View ArticleDashboard - What is it and what was it created in?
@MarcJennings wrote: What is the pimoroni-dashboard software written in? I'd like to put together a setup script for my little project, and the GUI-less GUI looks like a good way to get the values...
View ArticleRaspberry Pi 7" Screen version?
@iron wrote: Last year, I ordered a Raspberry Pi 7" touch screen, I think this was pretty close to release and it's been serving me very well until now. However there were two very minor issues,...
View ArticleSet_all() is missing from the UnicornHAT
@LimeBlast wrote: I'm playing with the UnicornHAT on a Pi 2, after having installed the software via the full install command, and I've found the set_all() method doesn't exist. I checked the source...
View ArticlePi Zero W no USB power
@freshPi wrote: Hello community. First time Pi user here. I was so excited to complete my first ever Pi project but I've stuck in setup. For some reason, either the usb adaptor or the port itself...
View ArticlePhat Dac | Scroll Phat | pivumeter
@northwarks wrote: My Phat Dac works perfectly, my Scroll Phat also works fine all on the same Pi Zero. I can stream a radio station with mpc and run the examples in the Scroll Phat folder. I've tried...
View ArticleIoT phat appears to be dead
@Shoe wrote: Hi everyone, I bought an ESP IoT phat a while ago, soldered the header on and spent some time working with it. All was fine. It then sat in a drawer for a while and I've just pulled it...
View ArticleRaspberry Pi Zero W fails to boot/update/install : kernel panic - Raspbian
@SylvainD wrote: Hi, I run into troubles with a Pi Zero W and Latest Raspbian.Please note that I'm pretty experienced with the PIs: I Use them since the first version, got several Pi Zero and another...
View ArticleIs it possible/necessary to synchronise ON/OFF?
@sandman wrote: Hi,I'm very new to the Raspi and would appreciate some advice please.. I would like to put together my own music player/juke box setup, maybe not original but it's a start!So basic...
View ArticleClik here to view.
Skywriter (full-size) constantly detecting inputs
@Shazoo wrote: Hi there, My fresh out-of-the-box Skywriter is having some problems.When running the test.py example, I get constant inputs eventhough the Skywriter is just lying there with me far away...
View ArticleVolumio + speaker phat
@SuperPierro wrote: Hi,I would like to know what was the code used to use the speaker phat on the top of mi pi zero as a speaker and with the LEDs blinking like on this video :...
View ArticleHdmi out
@kenneth02905 wrote: Help.I just recently purchased a Raspberry Pi 7" Touchscreen to connect to my Raspberry Pi3 model B.I have Kodi running on it and it works fine. I want to be able to use the HDMI...
View ArticleClik here to view.
Pi Zero DFRobot 2.8" USB Display glitches
@pd-andy wrote: Hi all, hopefully someone can chime in and point me in the right direction. I've been trying to get the DFRobot USB display working on my Pi Zero and am getting mixed results. Using...
View Article[Python] Change Scroll pHat buffer based on user input
@stevenjmesser wrote: Hey! First of all, I am having a ton of fun playing around with the Pi Zero and Scroll pHAT – thanks for putting this little LED wonder out there! But as this is my first time...
View ArticlePhat-beat doesn't work on Pi ZERO but only Pi ZERO W
@timmth wrote: Hi guys, I just received my Pirate Radio kit and I have built one and it is working fine. Then I am thinking switch the board to my old Pi ZERO with wifi dongle so I could make...
View ArticleEnvirophat analog inputs
@MarcJennings wrote: Hi, What's the best way of wiring a potentiometer into an envirophat's analog ports to get a reading please? I'm looking to add a couple to control timeout values in a script. I...
View ArticleFaulty Pi Zero?
@Guber1 wrote: Hello There! I'm trying to set up a Retopie image on my Pi zero (v1.3 without WiFi or BT) and I'm facing a lot of problems, it cost a lot to make it boot, I have to reset the board by...
View Article