Scroll pHAT HD 3x5 font change
@skolem wrote: Hello. I made a clock with Scroll pHAT HD using the 3x5 font. But the font is not monospaced and the digits jump around when the number 1 is displayed. I want to fix this. I guess I...
View ArticleSpotipy
@MarcJennings wrote: Quick one for those that have got it to work... Where is the config file that is used for the server? Is it /etc/mopidy/mopidy.conf? It seems to be where 'ps -aux' tells me the...
View ArticlePi zero stopping when plugging USB adaptor
@erwandf wrote: Hi, I just received my pi zero W, and when plugging the USB adaptor, the pi is stopping.If it's only with the power, it boots nicely. Any idea ? Thanks ! Posts: 7 Participants: 3 Read...
View ArticleExplorerhat and Tiny the robot
@hzainon wrote: Lovely to see you all at Piwars yesterday. I bought Brian's Tiny robot but wondering how to run four motors on Explorer Hat? Posts: 3 Participants: 2 Read full topic
View ArticleAutomation pHAT Servo Question
@lastof9 wrote: I am a new to creating my Pi powered project but I have an idea and I think my Zero would be perfect for. I want to drive three low powered servos (think needle indicators on a gauge)...
View ArticlepHAT-DAC on Pi0W - dma transfer could not be terminated
@vinodv wrote: Hello, I recently purchased a pHAT-DAC and your solderless header jig from PiHut (you didn't have the former in stock at the time) and installed on my Pi Zero Wireless. Both install and...
View ArticlePan-Tilt HAT Not Working
@whotookthepie wrote: I have set up my Raspberry Pi and followed the guide to install the examples etc. My issue is I when I run the "Smooth" program it starts moving and then stops and the Raspberry...
View ArticleIs it possible to remove the hammer-in connectors on a Pi or pHAT?
@Grayda wrote: As my question suggests, once you've hammered in the male and / or female GPIO connectors, can you remove them again? And if so, how? I've got my own Pi Zero W that I want to use in a...
View ArticlePirate Radio Phat Beat VU Meter
@Pergex wrote: Hi, it me again.I have a question. Is it poosible to change the VU Meters Scale, so that is shows higher level on lower loudness?If yes, how can it be changed? Thanks Thomas Posts: 6...
View ArticlepHat Scroll: Editing Fonts
@SparkyXI wrote: Hello Friends... Cannot seem to get a font change to take effect. I've edited the .png file, but there's not really a great guide on how to get that edit to actually take effect on...
View ArticleScroll pHAT special characters
@roberto.sanval wrote: Hello, how can I add special characters to the Scroll pHAT? For example: Accented words like: "Huracán" Spanish characters like: "Otoño" Degree symbol for temperature like: 24...
View ArticlePirate Radio - hot speaker, no VU meter and full volume
@Helix wrote: I too have taken delivery of the Pirate Radio kit and have had several 'goes' at getting it working as an internet radio. Hardware no problem. Internet connection working OK. Today...
View ArticleJoiner for Pi Zero camera cables?
@mushm0m wrote: Hi, I have the following items: Waveshare Pi Zero camera board:...
View ArticleAutomation-HAT relay operation
@gooFI wrote: Hi, I am wondering how I can get the relays to stay in the chosen state after the script has stopped.I am trying to controll an inverter with the 3 relays, and would like them to stay in...
View ArticleAutomation Hat : Relay vs output
@MoxFulder wrote: Hi there.I don't get the difference between the 24V tolerant output and the relay. Can you explain or give me an example ? I want to turn on a 12v/1a device. I know it will work with...
View ArticlepHAT DAC with Zero LiPo
@proofek wrote: Hello, Anybody having any experience with getting the two together. I need to get the zero mobile enough to attach it to a portable "toy". So battery power, fairly small and with an...
View ArticleNo Focus Close nor Distant objects, CAM004
@calleblyh wrote: My CAM004 arrived today (order#PI179967). Testing raspistill and raspivid picture is outof focus on all distances. I have indeed removed the small protectiv plastic piece covering...
View ArticleHaving problems with Unicorn Paint (can't find paint.py?)
@lemon-curry wrote: I've just today set up my Unicorn pHAT and muddled my way through the Getting Started with unicorn pHAT tutorial just fine so had a quick snoop and figured I'd give the Getting...
View ArticleDoubt about the real power of Speaker pHAT
@EverPi wrote: Hi, I'm not sure if the pHAT can deliver the 2Ws to the speaker included in the kit. I know the amplifier is 3W (3.2 acording the MAX98357A datasheet) and the speaker is 2W. But the...
View ArticlePi Zero W limit. Project kit + single board?
@nizt wrote: Hello, I would like to know if it is possible to order a Pi Zero + 1 Project kit (that also includes a Pi Zero). Does the limit apply to any combination of products that includes a Pi...
View Article