Mote Complete Kit connection to USB
@ashz wrote: I bought the Mote Complete Kit (Host + 4 Sticks + Cables) and programmed it via python under Windows and it works well. I tried to connect it directly to a USB charger to work but it only...
View ArticlepHat Beat, one LED always on full bright white when powered up
@alphanumeric wrote: I just installed a pHat Beat to a Zero W running full Raspbian. Installed and ran the Pimoroni dashboard. Then did the install for the pHat Beat. As soon as I apply power to my Pi...
View ArticleUnicorn hat hd cant get the paint program to work
@davidclancy wrote: Maybe I am stupid but try as I may following the online instructions I can not get Unicorn Paint to come up on the Pi3. Help please. Posts: 9 Participants: 2 Read full topic
View ArticleAdd a command to picade hat
@kendaddy wrote: Complete noob here. The story goes...... I am building an arcade table, have got my raspberry pi set up with a picade hat. All that is set up fine and everything works. the problem is...
View ArticleMicro Dot pHat brightness query
@ncguk wrote: Quick question: am I right in thinking that the Micro Dot pHat brightness setting is global, i.e. it affects all matrices at once and can't be independently controlled from matrix to...
View ArticleEnviroPHAT giving IO error when not directly attached to a board
@MGorchev wrote: Hello all, Im quite a newbie with all of this, but really interested in learning and doing more. Hope Im not gonna cause too much confusion and its not something completely obvious...
View ArticleHow to check if a (p)HAT is working without a Pi?
@hoch1009 wrote: Hello together, i received my Pi Zero W, Enviro PHAT, blinkt and mini black hat hack3r among other things a week ago and started playing around. I got blinkt working (stacked directly...
View ArticleCannot get Adafruit Stereo Bonnet to work
@zq8blazer wrote: I am trying to get the bonnet to work properly. I have it fully assembled and connected to a Raspberry pi 3. I've ran the setup found here...
View ArticleExplorerHat Pro stopped working on reboot
@Bairdsy wrote: Im new to the Raspberry Pi and recently got a Raspberry Pi Zero W with an ExplorerHat Pro. Im using these to build a small robot, and all has been going well until this morning. I...
View ArticlePhat Beat increase VU meter sesitivity
@alphanumeric wrote: Is there a way to increase the VU meter sensitivity so it peaks at lower volume levels? The sound is way to loud if I turn it up enough to get a good indication on the VU meter....
View ArticleInstaller trouble with the Unicorn Hat HD
@darmain wrote: Hi. Today we started to experiment with our "straight out of the box" Unicorn hat HD. We also had a brand new Pi Zero W and a loaded an 8Gb SD card with the Jessie Lite image. After...
View ArticleHDMI and Hyperpixel
@itimpi wrote: I have the HyperPixel, and when I run the Pimoroni installer it configures everything so that when I reboot the HyperPixel takes over as the main screen and the HDMI stops working. What...
View ArticleClusterhat and WiFi
@itimpi wrote: I was wondering if there is anything documented about getting a cluster based on the Clusterhat working when the controlling Pi is using WiFi rather than direct Ethernet? I have it...
View ArticleUnicorn Hat HD will not work for me on Jessie rpi3
@davidclancy wrote: Hi Thanks for the help so far but try as I may I can not get the hat to light up. All the software and dependency are installed. Trying to run examples from the unicornhat dir...
View ArticlePan-Tilt Hat Roaming
@RaspberryPicardBox wrote: Hi there,I recently got the cute little pan-tilt hat and started messing around with the face tracking examples.They work great, but I'd like the module to 'roam' per say...
View ArticleSpeak phat not playing sound
@christineconnelly wrote: Just bought and installed the speaker phat and the LEDs work but I don't hear any sound. I do hear sound through my HDMI. I'm new to Pi and soldering so I don't really know...
View ArticleClik here to view.
Unicorn HAT HD working but don't forget to use GROUND!
@edjones wrote: Hi all, just got the Unicorn HAT HD and wow the lights! After confirming the display worked on my RaspPi 2 I decided to try it detached from the board via some jumper wires. The...
View ArticleExplorer Hat Pro believes it an Explorer Hat basic
@GaryJFbr wrote: I've being using an Explorer Hat Pro with Scratch on a Pi Zero to read the analog output of an Adafruit UV Light Sensor S12SD. The out put is connected to analog 1 with the power from...
View ArticlePirate Radio - PhatBeat board doesn't connect to Pi
@TigersFan44 wrote: I assembled the Pirate Radio kit but one of the issues I have is that the Pi Zero doesn't stay on the PhatBeat board. When the pins are lined up, it doesn't snap on and It's very...
View ArticlePibow layers and availablity
@PiguyAnge wrote: I am a huge fan of the pibow cases. The discontinued midnight coupe with a lego base added looks very well mounted on a small single layer lego mounted/superglued as a mount on the...
View Article