Rasp 2 won't boot
@djdan00 wrote: I have a raspberry pi 2 it was running the touchscreen and a unicorn hat. I think the power supply died.I have a new power supply that I know works as it works with my pi 1 but my...
View ArticleRaspberry Pi Zero Buzzing/Humming Noise
@Saturn74 wrote: Hi All, Since yesterday I have been experiencing the following issue with my beloved Raspberry Pi Zero. Basically as soon as I power up the Pi I can hear some sort of buzzing/humming...
View ArticleSkywriter theremin.pd demo does not work
@555a wrote: hi, I had a bit of fun getting my skywriter hat to work but a firmware update fixed that. forums.pimoroni.com Skywriter Firmware Info error Brand new Raspberry Pi 2 with the Skywriter Hat...
View ArticleDrum Hat pad not as sensitive [SOLVED]
@keebie81 wrote: I got my Drum Hat set up last night with the code from the github page. It works great except I need to press a bit harder for the upper left pad (the one with a 7 on it). Is this...
View ArticleRaspberry Pi Zero - Wont Boot / Not Powering Up
@gadgetoid wrote: If your Pi Zero looks like it's not booting, or powering up; read on... It's quite usual for the Pi Zero to not work with existing SD cards, including the current NOOBS SD cards, or...
View Article[Solved] Unable to read I2C data from PiGlow with Raspberry Pi
@lategoodbye wrote: Hi, i'm using a Raspberry Pi B (rev 1). I have connected a PiGlow to the P1 Header. The I2C bus clock is set to 100 kHz. Writing I2C data to the PiGlow works fine, but reading...
View ArticleRaspberry pi zero phat dac
@hept wrote: Hello. I have a raspberry pi zero and install phat dac. I am getting no sound. I followed the instructions posted on your website, pimoroni. Any other ideas, thoughts? Posts: 6...
View ArticleHELP: Not received my order
@konj05 wrote: Hi,i have tried to contact you on support@pimoroni.com three times, but no one answer me, i really don't know why? It is almost 30 days that i bought PI Zero, but i didn't received yet....
View ArticleFullsized Skywriter library compiling issue
@m57 wrote: Hi, I wanted to test the fullsized skywriter panel with the code you posted on: http://forums.pimoroni.com/t/skywriter-with-arduino-getting-started-problems/887/3 and the library files...
View ArticleUnicorn HAT + GPIO cable
@pianogamer5 wrote: Hello friends! I just got my hands on a new Unicorn HAT, a GPIO cable, and a box header for my Raspberry Pi 2. I (think I've) got it all set up, however I don't get any LED output...
View ArticleESP IoT pHAT Flashing
@mikehole wrote: Hi, I have found some quite interesting firmware that I would like to get onto the ESP IoT pHAT if possible. Here is a link to the firmware: https://github.com/jeelabs/esp-link There...
View ArticleDisplayotron HAT not displaying text
@Wasted wrote: I updated my raspberrypi with \curl -sS get.pimoroni.com/uptodate | bash Installed everything with \curl -sS get.pimoroni.com/dot3k | bash No errors just rebooted but all the samples...
View ArticleDisplayOTron Hat not running
@ialong wrote: Hi, new at this and having problems running this hat. Im using a B+ Pi running wheezy not jessie as I dint know jessie is the new Raspbianuntil I had spent 12 hours installing all the...
View ArticleUnicornHAT show .png files?
@Craio wrote: I have an 8x8 .png file I would like to display on the UnicornHAT, I've never used python before for any projects so this is new to me and I'm struggling to work this on out on my own so...
View ArticleClik here to view.
HTU21D-F Humidity Sensor is faulty
@Nw92 wrote: Hi there, I ordered 6 HTU21D-F in order #PI46874. I've tested all of them and one of them appears to be faulty. Other units report a humidity level of 38.8%, except one, which reports a...
View ArticleArduino and Breadboard Holder
@jono101 wrote: Hi,could somebody let me know the size of breadboard that will fit the Arduino and Breadboard Holder please? Regards, John Posts: 3 Participants: 2 Read full topic
View ArticleFona 808 - Can't get to boot - Flashing blue LED
@TimGUK wrote: I have a FONA 808 that arrived today. I have connected it as follows: 5V - Powered from 5V railGND - Connected to 0V railVio - Powered from 5V railKey - Connected to 0V railvBat -...
View ArticlepHAT DAC & Display-o-Tron compatiblity
@lunar wrote: Hi! According to pinout.xyz there should be no conflict between the pHAT DAC and the Display-o-Tron. Did I got this right? (I'm happy to hunt for a bad solder, but I'd rather not search...
View ArticleScroll pHAT errno 110
@TracyS wrote: I have two of the scroll pHATs, one works fine, but the other one gives an error as follows : pi@atlas:~/Pimoroni/scrollphat $ python test-all.pyTraceback (most recent call last): File...
View ArticleDisplay text on UnicornHAT
@Craio wrote: Hi there again, is there any way to display text on the UnicornHAT in a similar way to how the Scroll pHAT is capable of working? My goal is to show the current temperature on the...
View Article