Raspberry Pi Zero - Minecraft Pi Crashing
@Cont3mplation wrote: Just received a raspberry pi zero today along with adaptors and have been very pleased with it, however I noticed while using it and testing things that the Minecraft pi edition...
View ArticleSpeaker pHAT turned quiet
@dchalloner wrote: I’m hoping for some help here. I purchased the speaker pHAT to add to a Pi Zero W last Saturday, I soldered the speaker and connected it up on Wednesday. I installed MusicBox on to...
View ArticleClik here to view.
Possible to cycle button events in Touch Phat?
@armyofme wrote: So I’m loving the TouchPhat and have attached to my fridge. I have one button to switch my amp on and off, two buttons for volume, leaving me with three buttons for Kodi (B is...
View ArticleMultiple Sound Outputs with PhatDac?
@armyofme wrote: So I bought the PhatDac to improve sound through analogue and it’s great! A very noticeable difference! :) But here’s my problem. Before the dac I was using my PI2 as Kodi media...
View ArticleClik here to view.
Which CS pin, BCM 8 or 0, is right Inky pHAT CS?
@vjou wrote: Inky pHAT is really impressive. I’ve just started playing with this and CS pin assignment in the python code is puzzling me. From pinout.xyz, Inky pHAT’s CS pin is BCM 8. image.png695x689...
View ArticleEmulating UnicornHat results in e.g. Jupyter Notebook
@jde wrote: I’m just getting started with my new UnicornHat, but travel a lot for work so need to leave it home. Is there a way that I can simulate the output, so I can try out my code on the road? I...
View ArticleThree Port USB Hub with Ethernet - microB connector vanishes and I lose...
@Feek wrote: I’ve emailed Pimoroni about this as well but thought it worth posting here. I’ve just taken delivery of a Pi Zero (not W) and a “Three Port USB Hub with Ethernet - microB connector”....
View ArticleTouchpHat : A and B no sensitive
@jpl wrote: Hi, TouchpHat purchased late nov. 2017. Was setup and working in December 2017. Touchs A and B are no more sensitive : no LED feedback when pressed, no detection in .py script. Others...
View ArticleProblems of the four letter variety
@HOD wrote: Any idea why I’m getting the following when attempting to run the examples for four letter phat? I2C is enabled and stretch lite is updated. I don’t think my soldering is that bad....
View ArticleAssitive technologies project
@alphanumeric wrote: I’m working on something for a friend, his wife had a stroke and has some mobility etc issues. My plan was to mount a Touch pHat, Drum Hat, and Speaker pHat to a pHat Stack. Then...
View ArticleMy sound detector has stopped working
@Avvy60 wrote: I have been building this project : https://learn.sparkfun.com/tutorials/addressable-rgb-led-music-and-sound-visualizer and once I received all the parts, I tried it out, and yes it did...
View ArticleEnviro-pHAT Interrupt Access?
@BruceH wrote: I have a Pi0W with an Enviro-pHat on the pi-bus running on Stretch. The I2C probe software (i2cdetect) sees all the devices on the pHAT. On the Enviro-pHat, are either of INT1 (pin 11)...
View ArticlePimoroni Scroll Bot Issues
@zmfields87 wrote: Hello! I’ve assembled, soldered, and flashed a raspberry pi zero w with all the correct OS and packages. I’ve been using the instruction guide found here:...
View ArticleFritzing for the small Explorer pHAT
@cagiva wrote: Where can I find the Fritzing file for the small Explorer pHAT board? The Pimoroni GitHub repo only seems to have the large one. Posts: 2 Participants: 2 Read full topic
View ArticleAdditions to clean-shutdown script
@HOD wrote: I’ve got the Zero LiPo SHiM hooked up with a Scroll pHAT HD in a badge case. Although the clean-shutdown daemon works fine, I’d like to also get it to kill any scripts currently running...
View ArticleReboots before startup finished
@MikeDruiven wrote: I built the Pirate Radio kit and installed the VLC player according to the Internet Radio tutorial using “curl https://get.pimoroni.com/vlcradio | bash”. The Pi boots up OK on its...
View ArticleUnicorn HatHD Clock - need help to port code from Sense Hat
@MisterMatt wrote: Hi there, I recently came across a great little project by Steve Amor to create a Pi clock using the Hours and Minutes displayed on 2 lines. It was originally written for the Sense...
View ArticleHow can I adjust the equalizer
@brezi wrote: hello how can I adjust the equalizer on the phat beat. i need more bass. one problem what i had was the bad sound. i change the /usr/bin/vlcd " --compressor-makeup-gain 12.0" to:"...
View ArticleClik here to view.
Phat DAC no audio
@Grizmo wrote: I’m trying to get pHAT DAC to work on a raspberry pi zero w. I soldered it and ran curl -sS https://get.pimoroni.com/phatdac | bash. On 2nd run(test) there is no sound. I tried the...
View ArticleAIY Voice Kit Hat not responding
@cpture wrote: Hi, I recently bought an AIY Voice kit and I assembled it all out of the box, followed the instructions and the Audio test brings up a bunch of errors which I can’t resolve. I’m using...
View Article