Raspberry Pi Zero + Unicorn Hat HD: Not working [SOLVED]

@jerseyschorr wrote:

Hi all,

Hope you can help. I’ve got a fresh Rasbian image with the Unicorn HD Hat connected to my Zero. None of the demos are working, I can’t get anything. The examples “run” but nothing appears on the Hat.
No errors.

I’ve testing the image/sdcard/hat on a Pi 3 and it all works. Any suggestions?

I’ve run the full install curl https://get.pimoroni.com/unicornhathd | bash

~/Pimoroni/unicornhathd/examples $ lsmod
Module                  Size  Used by
spidev                  7220  0
cfg80211              542402  0
rfkill                 21476  2 cfg80211
snd_bcm2835            23253  0
snd_pcm                89814  1 snd_bcm2835
snd_timer              22428  1 snd_pcm
snd                    60280  3 snd_timer,snd_bcm2835,snd_pcm
spi_bcm2835             7520  0
fixed                   3033  0
uio_pdrv_genirq         3718  0
uio                    10038  1 uio_pdrv_genirq
usb_f_ecm               7416  1
g_ether                 5037  0
usb_f_rndis            17908  2 g_ether
u_ether                12837  3 usb_f_ecm,g_ether,usb_f_rndis
libcomposite           48212  3 usb_f_ecm,g_ether,usb_f_rndis
dwc2                  128996  0
udc_core               38862  5 usb_f_ecm,dwc2,u_ether,usb_f_rndis,libcomposite
ip_tables              12427  0
x_tables               22130  1 ip_tables
ipv6                  398081  20

also

~/Pimoroni/unicornhathd/examples $ ls /dev/spi*
/dev/spidev0.0  /dev/spidev0.1

Many Thanks,
jerseyschorr

Posts: 3

Participants: 2

Read full topic