@mamvcivm wrote:
Hi, I've just assembled the Mote Phat and installed it on an RPi 3 running Pixel. I bought two Mote LED strips but no connectors, so I'm using the red micro USB cable that came with the BBC microbit kit and a shim I bought for one of my pi zeros. For the other Mote I'm using a standard micro USB cable and another shim. So, I'm trying the various python example scripts and in every case only the mote connected with the red USB cable works, I've tried swapping channels, swapping shims, swapping Motes, but no combination results in both Motes working at the same time. Is there something special about the red USB cable? I've tried swapping the standard USB cable for a white one similar to the red one but no change... I doubt I've damaged the board as each channel will work individually...
Any ideas?
Puzzled of Manchester...
Posts: 2
Participants: 2