Enviro PHAT and 1-wire
@lcr wrote: I setup 1-wire support for ds18b20 I then added then enviro PHAT with no problems The ed lights on the enviro are not working due to a conflict with the default 1-wire pin assignment What...
View ArticlePan-Tilt HAT repo
@monglet wrote: Dearest hearties, Am very much enjoying the Pan Tilt HAT. Have managed to put together a very juddery potentiometer controlled script at present (much like the one from latest bilge...
View ArticlePan-Tilt HAT Camera ribbon cable length
@stuartiannaylor wrote: Hi you have a little video of the Pan-Tilt HAT with camera and NeoPixel strip. What length of ribbon cable did you use? Is that the 30cm one? Posts: 5 Participants: 2 Read full...
View ArticlePiBow & Sense Hat
@smithy1155 wrote: I'm just wondering if anyone could help me I'm new to adding accessories to the Raspberry Pi I've currently got a Raspberry Pi 3 and looking to buy a Sense Hat with a Pibow 3 coupe,...
View ArticleSetting up Pi Zero OTG
@rooneybuk wrote: Hi All, I've followed the guide below to enable the USB Gadget in Ethernet emulation but when i connect this to my Windows 10 and Windows 7 PC's it doesn't get detected, i see some...
View ArticleRecently ordered Picade
@jcawlfield wrote: Got it all put together but when powered screen is white with a hashed capitol M in the upper right corner I guess I am missing something? first of several go throughs found and...
View ArticleUnicorn pHat does not work anymore after sudo update && upgrade
@mrmeeseeks wrote: Hi, I recently update my Raspberry Pi 3 with sudo apt-get update && sudo apt-get upgrade. Since then my Unicorn pHat does not work anymore. Even the Pimoroni examples are...
View ArticlePropeller HAT as a UART expander for RPi
@MJHanagan wrote: Are you still actively working on and supporting the Propeller HAT for the Raspberry Pi? I think this HAT would lend itself nicely as a UART expander easily handling 7 ports. Each...
View ArticleMote pHAT and free GPIO
@nbla wrote: Hi, I have ordered a Mote pHAT for my Pi Zero, and I have a project in mind that's going to need 3 GPIO pins. If there are any free after using the Mote pHAT, can anyone point me in the...
View ArticleCooked my Pi0 after less than a day
@tehcmn wrote: A question for Pimoroni staff, this one: Long story short, I made a dumb dumb, and somehow have managed to cook my Pi Zero via the serial console, have tried a whole bunch of different...
View ArticleErrors in Skywriter pdtone.py file
@rbnman wrote: I've just got a skywriter hat and have been trying it out on my Pi3. I find that the pdtone.py file which is called by the synth.py file is giving errors.I see that some indentation...
View ArticleDecoding Morse Code
@UK_Ham wrote: Has any one tried using a Pi to decode Morse Code and displaying it on a 16 x2 screen.I am thinking I would need Audio in from the receiver and then possibly software to decode the...
View ArticleNoise with PanTiltHat
@Sylvaner wrote: Hi, I bought a pantilthat et j'ai un petit problème.When i import the library with python, one of the servo motor make noise like a vibration.I can disable it but i prefer use the...
View ArticleZero LiPo how to check it works
@tbr wrote: So my Zero LiPo arrived and tonight I tried soldering it to my PiZero. I found this really tricky due to the small size and my less than stellar soldering abilities. So I plug a LiPo in...
View ArticleUsing DisplayOTron to Display custom characters
@mmm wrote: Hi all, Newbie here! I'm just playing about with my new DisplayOTron but having issues getting it to display custom characters. I've read the documentation on the GitHub repository which...
View ArticleUsing the automation hat for analog control
@aquafemi wrote: Hi there. I was wondering how to access the raspberry pi's PWM through the automation hat? I was hoping to use it along with a low pass filter to output from 2-10V DC to control...
View ArticleUnicorn pHAT & Python - RainbowLamp project
@BlackSheep wrote: Hello ! First thing first, i'm quite the noob concerning python. I'm making a little project for the imminent birthday of my sister and i'm trying to do a pretty thingy : a lamp....
View ArticleClik here to view.
Did I mess up my Black Hat Hack3r?
@blackt12 wrote: Hey guys, I got the Black Hat Hack3r and didn't realise it needed assembly so naturally I went and bought a soldering iron and went to work. It wasn't a perfect job I'll admit but I...
View ArticleMote phat, only one channel
@mamvcivm wrote: Hi, I've just assembled the Mote Phat and installed it on an RPi 3 running Pixel. I bought two Mote LED strips but no connectors, so I'm using the red micro USB cable that came with...
View ArticleExplorer pHat Questions
@roko wrote: Hello everyone. I am working on a toy car project and i am bit tight with space, so i have few question about this board. Can i power explorer pHat and pizero over 5V pins on explorer...
View Article