Unicorn pHat DOA?
@_si wrote: I just purchased a unicorn pHat for my son’s GCSE engineering project to go with his brand new Pi Zero W for the project (we bought the Pimoroni Raspberry Pi Zero W Project Kit) I wanted...
View ArticleManual of the BME680 Python library
@DirkJan wrote: Is there somewhere documentation about the functions inside the BME680 Python library? Thanks already from DirkJan, Netherlands Posts: 2 Participants: 2 Read full topic
View ArticleI2c Sensors and Node Red Dashboard
@mamvcivm wrote: I’ve recently bought the Breakout Garden HAT and some sensors, e.g. the BMP280 and BME680, I’d like to use Node RED to create a dashboard that would display the outputs of the...
View ArticleRight side button not detecting
@davekoo wrote: I have the Picade setup and working. The only thing not working is the right side panel arcade button. I am not able to assign it in the configuration screen. The wiring seems to be...
View ArticleClik here to view.
InkyPhat cannot write in straight lines
@Andyroo wrote: I’m currently using a v2 red/black/white InkyPhat on a Pi zero W and I’ve just noticed an odd line up issue with some of the letters (‘t’ being the main culprit) where they are not...
View ArticleBluetooth Headphones
@jukebox19 wrote: I would like to use a bluetooth dongle on my Pi 3B+ which has a IQAudio digiamp+ attached. I am running Volumio2 The onboard bluetooth is disabled because of conflicts with the...
View ArticleClik here to view.
Unicorn Hat HD, adjacent pixels lighting up
@oliver981 wrote: Hello I recently bought the Unicorn Hat HD and tested it by running the “lines” script. I noticed some of the pixels under the diagonal green line lit up, which they shouldn’t do....
View ArticleClik here to view.
Issue with scroll pHAT HD - [Errno 121] Remote I/O error
@danitres wrote: Hi everyone, I’m having some issue with the Scroll pHAT HD. Every time I used it with the raspberry pi Zero WH, after the commands: import scrollphathd as sphd sphd.set_pixel(1, 3,...
View ArticlePicade Hat volume buttons not working
@nimbo77 wrote: Hi. I’m building a cabinet around a Pi 3B and a Picade Hat (original version, not X). So far everything is working fine except the volume buttons. I soldered pushbuttons to the GPIO 13...
View ArticleCables for chaining Ubercorns
@johnmccabe wrote: Hi, Do you stock the cables used to chain together Ubercorns? I’ve got 3 I’d like to try hooking together and can’t find a link to an appropriate cable on the store. Thanks John...
View ArticleKeybow as a remote? Is KeyboxOS mandatory?
@DarrenHill wrote: Just seen the new Keybow, and I was wondering if it is mandatory to use of the KeybowOS, or if it can be used with a more general Raspbian (or similar) set-up? Was just thinking...
View ArticleBackup power supply
@jukebox19 wrote: Hi all. I am looking for a way to supply a Pi3B+ with an independent 5volt supply so that I can use/build a safe shutdown backup power supply. I am only really interested in bringing...
View ArticleKeybow as Bluetooth rather than USB Keyboard?
@noggin wrote: Would it be possible to get the Pibow to appear as a Bluetooth keyboard (as the Zero WH has Bluetooth support) rather than a USB HID? I can see that being useful in some situations?...
View ArticleAutomation HAT with acceleration sensor
@jnas wrote: Hello, i am fairly new to automation hat. I would like to connect a acceleration sensor module (MPU-6050) to the automation hat. I found the following tutorial...
View ArticleClik here to view.
Keybow manufacturing whoopsy
@monglet wrote: Found a little flaw on my keybow received today IMG_0275.jpg1580x2108 681 KB It stops that key from working (keyswitch doesn’t contact properly). Going to try and fix it- will see how...
View ArticleKeybow power cable loose
@sjm wrote: Hi - I’ve noticed that it’s really hard to get the keybow OTG usb cable plugged in securely. I’ve got it all up and running and working, but the smallest movement of the cable can send it...
View ArticleKebow - changing layout files dynamically
@iain1940 wrote: I should really do my homework before asking questions ! I finished assembling my Keybow (my Christmas present to me) two hours ago and it worked first time with no problems which is...
View ArticleKeyBow Lights up but no inputs
@flyingferret wrote: KeyBow Lights up but no inputs. Excited to get hacking with this but after building and installing, the keys light out with their pretty defualt pattern, but on testing in notepad...
View ArticleKey combinations
@robpl wrote: Keybow received today, I want to use it with my Mac where I’m running Logic Pro X. Having to do multiple key presses sort of defeats the object since what I want is a number of keys set...
View ArticleKeybow - only uses 'default.png'
@iain1940 wrote: Trying to change LED patterns I noted that there is a load_pattern statement in ‘keys.lua’ function setup() keybow.load_pattern(“static-tropical.png”) [but this is in patterns/ ?] end...
View Article