Bme680 smbus
@Virgilio wrote: Having trouble using my BME680 after a manual install. When I run the read-all script as posted on the GitHub page I get the message: File...
View ArticleScrollphathd not working
@GreyGoose wrote: Hello. I’m new to the forum. I purchased a scroll bot kit and am not having any luck getting pixels to light up. Soldering of the headers appears to be solid. The scrollphathd sw...
View ArticleHyperpixel4 non-touch display for Raspberry Pi and 1-wire
@Katoen58 wrote: Hi there, I bought your Hyperpixel4 non-touch display and it is nice!!! As you say on the Getting Started-page that all GPIO-pins are used, but that it is possible to use i2c by a...
View ArticleLakka in the picade
@iOtero wrote: For the picade you recommend retropie, which i do not like anithing. So… Would a pi work with Lakka in the picade or have many problems? Posts: 1 Participants: 1 Read full topic
View ArticleScreen upgrade issue
@raindog wrote: Hello. I just recieved my screen upgrade for the picade new model. I noticed that the holes of the screen do not fit with the holes for the screws of the old acrylic screen. ,...
View ArticleNon fitting pibow top layer
@The_Handy_Andy wrote: Hi I bought a Pi 3 A+ plus a Pibow. On the top layer the cut out for the HDMI socket is too small (front to back). In trying to ease the layers together the L shaped bit that...
View ArticleKeybow not working
@robpl wrote: Got the Keybow all set up but there’s nothing being output from it. On attaching to a Windows PC it returns the message that the USB device is not recognised. Device Manager reports...
View ArticleUnicorn HAT software
@pinkpatchwork wrote: Hi, I have just tried to update/upgrade the software with curl https://get.pimoroni/uptodate | bash sudo apt-get update sudo apt-get upgrade and I understand there is now meant...
View ArticleMLX60940 stream to v4l2loopback for Open CV
@lukeir wrote: I have the MLX60940 ir sensor working on my Raspberry Pi with the fbuf example code from the library. I also installed OpenCV and v4l2loopback. I do not know how to change the code in...
View ArticleCoin and Player 1 buttons aren't working on Picade Console
@Skilgannon1971 wrote: Hi there, just built my new Picade Console and installed the latest version of retropi. I’m using Raspberry Pi 3b with it. Everything is working fine apart from the coin button...
View ArticleClik here to view.
Zumo chassis with Arduino Shield
@alphanumeric wrote: I’m just in the process of assembling my Zumo chassis and mounting my Arduino shield to it. shop.pimoroni.com Zumo Chassis Kit – Pimoroni The Pololu Zumo chassis kit is an ideal...
View ArticlePicade buttons not working
@camthecow wrote: I’m not too knowlagable with any of the programing of this, just wondering if I’ve done somthing dumb. I’ve tried showkey and nothing comes up for any of the buttons or the joystick....
View ArticleAutomation Hat galvanic isolation
@bstempi wrote: Hi, I’m a newbie that is attempting to use this hat for environmental sensing. The sensors in question (which would be read via ADC) require galvanic isolation. I don’t see anything in...
View ArticleQuestion regarding the Automation HAT and input signal safety
@ParticleBeam wrote: I am currently setting up a Pi with the Automation HAT to monitor some security outputs at my home. The signals are 12V based. I was reviewing the schematics for the Automation...
View ArticleAutomation Phat inputs
@ady8077 wrote: Hi.1st post went in general chit chat, I’ve just bought one to monitor 2 relay contacts using home assistant, but on testing it is missing about 1 in 10 input changes. Also neither of...
View ArticleRaspberry Pi Sense HAT on Ubuntu Mate (ROS)
@moonwalkeraz wrote: Hello I’m working on a project for school. I’m using Sense Hat on Raspberry pi 3 B to display pixels on led matrix and IMU to get yaw. But the problem is that I’m trying to run...
View ArticleKeybow pressed / not pressed (issue, maybe)
@Bootnut wrote: Hello I’ve been playing with the Keybow and have noticed some potential issues, I’m using it connected to a MacBook Air (2017) if I use the following code found at...
View ArticlePicade (new) 10" screen upgrade kit concerns
@SordosPi wrote: I’m somewhat disappointed in how the Picade 10" screen upgrade was packaged. 1. Instructions were not appropriate for the upgrade kit It seems like the addendum from the new 10"...
View ArticleKeybow - adding HID codes for media keys
@Kella wrote: Hello ya’ll, I’ve been trying, and failing, to have keys on the Keybow act as media keys (such as Play/Pause, Forward, etc.). Using...
View ArticleConnecting switches to GPIO 23 and 24 prevents PhatDAC operation
@jerryleblanc56 wrote: When I connected 2 switches to GPIO 23 and 24 (plus 3V3 and GND) the PhatDAC stopped working. PiMoroni claims that the PhatDAC only uses 3 GPIO pins per this page...
View Article