Clik here to view.
Corrupted 3.5 Hyperpixel - Screen Inverted (not flipped)
@BUZZBY wrote: I have been using the HyperPixel 3.5 touchscreen for quite a while… I have recently upgraded the Pi and used the latest build of Raspbian… However using the updated setup script my...
View ArticleSpeaker Phat connection
@adambarnett wrote: Hi All, I just got my speaker Phat, and i want to use it with my Rasp Pi Model B. I soldered the 20Pin and the two connector wires and then plugged it into the 20 Pin on the Rasp...
View ArticleClik here to view.
GPIO for Button Shim and Witty Pi 2
@kit2 wrote: Hi all, I’m having trouble with getting my Button Shim and Witty PI 2 to work together, I was after a bit of simple advice of how I can use both of them together. The witty pi uses 4 GPIO...
View ArticlePicade Console -- Audio issues (Reposted from Picade)
@InfectedRanger wrote: ( its my second day on the forum here… I made a post in Picade asking for help but I’m not sure if that will get me some support so I’m reposting it here. I apologize in advance...
View ArticleAutomation HAT/pHAT outputs and external power supply wiring issue
@lwi wrote: Hi, I am trying to use the Automation Phat to control a lighting fixture (wiki) with an external 10VDC power supply. The wiring is as follows: 10V psu positive lead ----> positive...
View ArticleError while compiling mlx90640-library
@GobLin77 wrote: Hi all. Trying to compile mlx90640-library on the latest raspbian I get the following: sudo apt-get install libi2c-dev Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird...
View ArticleKeybow : keyboard layout
@gmenier wrote: Hi. Keybow config : Is there a simple way to change the keyboard layout used ? Setting a ‘A’ key in the lua script, I get a ‘Q’ stroke on an Azerty keyboard (the default config is set...
View ArticleClik here to view.
Keybow--Only 2 lights light up
@puddingtime wrote: I downloaded the OS, extracted the files to my SD card and plugged it in. When I power the keybow up, the only keys that light up are the green indicator light and then one other....
View ArticleInky wHAT default image
@yannick wrote: Hello ! Is the default image that comes with inky wHAT available somewhere ? I’ve setup a Pi and a inky wHAT and I’d like to give it away as a present, and it would be nice to have the...
View ArticlePicade X Hat - no sound
@Zach wrote: Hi, I have purchased and built a Picade with the X hat. Everything works fine except I hear no sound out of the speaker. I’ve checked speaker wiring, reflashed with the current Retropie...
View ArticleInitial OS configuration on Pi with dead HDMI
@Richard238 wrote: How can I install an OS on a pi with no HDMI? The HDMI is dead, won’t work, has been that way for ages. It’s been Ok that way, but the SD card has crashed and needs a fresh one, and...
View ArticleClik here to view.
HyperPixel4 & EVDEV question
@BroMarduk wrote: I was attempting to run a HyperPixel4 with touch on a Pi 3 using latest Raspian Lite 2018-11-13. Ran the HyperPixel4 installer and display is working fine. Running in the default...
View ArticleClik here to view.
Orientation for ribbon cable and enviro phat
@myx wrote: Might seem like a stupid question, but I’m trying to work out exactly how to connect my gpio ribbon cable to the enviro phat. I’m struggling because I’m not sure how the input pins from...
View ArticlePan Tilt Hat has SPI gpio slots?
@excamo wrote: Noticing that the pan tilt hat https://shop.pimoroni.com/products/pan-tilt-hat?variant=33704345034, has various gpio connections available from the top of the board. Are these redirects...
View ArticleSetting up pHAT BEAT in Docker
@mikeb1 wrote: I’m trying to get the Pirate Radio working through Balena (formerly Resin) I’ve tested the hardware using a regular Raspbian image, using curl https://get.pimoroni.com/phatbeat | bash...
View ArticlePhatBeat / Pulseaudio
@hpb wrote: Hi all, stumbled some days ago on Phat Beat, thought it a good improvement for my granddaughters phoniebox First try: Raspberry 3b+ with latest Raspbian Installation went like a charm,...
View ArticleThermal Camera MLX90640
@deano wrote: Absolute novice and newbie here. I was bought the Raspberry Pi 3 B+ for Christmas along with the Thermal Image camera MLX90640. I have setup my Pi but i cannot get my head around setting...
View ArticleHyperpixel 4 Issues
@deano wrote: Me, again. I can’t get the Hyperpixel 4.0 touch to work. I’ve installed the relevant stuff by using the one line installer code and also tried via GitHub but nothing. Pi reboots and I...
View ArticleSeeking 4x4 keypad for Onion Omega 2 (hardware novice)
@mawg wrote: I have been an embedded programmer for decades, but only in large projects, and it might surprise you that most of the software guys never learn anything about hardware. I prefer the...
View ArticleClik here to view.
Poor Picture Quality 10" Display on PICADE
@ThomPar wrote: IMG_20190131_223006_BURST001_COVER.jpg2579×1934 2.5 MB Hello all, I just bought a PICADE 10" and have some trouble with the picture quality. What I tried until now: 2 Power-Plugs, 1...
View Article