Making fan shim "dumb"
@wildestpixel wrote: As fanshim isn’t on pinout.xyz yet - and given I like the form factor and prefer it to having a.n.other 5v 2 pin fan wired up and around my IQAudio DACPlus, I was wandering if...
View ArticlePMS5003 No Output
@n7qnm wrote: Setting up an enviro+ with PMS5003. After doing a pip install configparser, the installer seemed to work and all the sensors EXCEPT the PMS5003 (the main reason I bought the thing). When...
View ArticleRaspberry Pi 4 + Hyperpixel 4 screen in portrait mode touch seems inverted
@markmcgookin wrote: Hi, I was pestering people on twitter about this here (Can see a video there of what’s happening). I have a new Raspberry Pi 4 setup with the latest raspbian os, setup headless...
View ArticleUnable to get Enviro+ to work from crontab when keyboard not connected
@ashimmin wrote: I’ve built the air quality monitor and connected it to Luftdaten following all the instructions here:...
View ArticleClik here to view.
TV Hat doesn't work
@benclark06 wrote: Hi! So I’ve connected my TV Hat, but when I try to setup TVheadend, nothing appears under TV Adapters. What gives? rpi.jpg1280×720 85 KB Thanks - Ben Posts: 5 Participants: 3 Read...
View ArticleGFX Hat not displaying any text
@zemariamm wrote: Hello everyone, I just bought a raspberry PI 3 B+ and installed Raspbian, I purchased a GFX hat and connected it to my raspberry pi (also using a pibow coupe), I tried to run the...
View ArticleThe Venerable PiGlow, Buster Problems?
@zimchaa wrote: Not sure if there should be a Raspbian Buster thread perhaps? But I’m trying to use PiGlow on the latest Raspbian (fresh install, Raspbian Buster Lite, Minimal image based on Debian...
View ArticleHyperPixel 3.5 and Pi4 Not work
@homer66 wrote: Hallo, HyperPixel 3.5 display not working lastest version Raspbian Buster and Raspberry Pi 4. Try it clean OS, and installing command: “curl https://get.pimoroni.com/hyperpixel | bash”...
View ArticleChanging manufacturer and device name for Keybow?
@jgarbers wrote: I’ve been experimenting with the Keybow a bit, trying to determine what scan codes are being sent, and noticed that the device identifies itself as a “Bar Gadget” from manufacturer...
View ArticleEnviro+ schematics for mics6814 heater and ADC connection please
@TheHWCave wrote: Enviro+ is great but I want to understand how each sensor works in detail. Can we please get some information how the mics6814 heaters are wired and how the sensor outputs are...
View ArticleFan Shim - Install Service Preempt bug
@Steve wrote: I have a fan shim. I built it OK, and mostly the software works OK. There is a bug though (IMO) in the script to install the service. Source for install-service.sh is here github.com...
View ArticleSensible values to use with Fanshim daemon
@jhwinters wrote: The support libraries for the Pimoroni fanshim come with a sample daemon process which you can run from systemd and thus automatically control the starting and stopping of your fan...
View ArticleDisabling LiPo SHIM LED
@argh_matey wrote: Is there an elegant way to disable the blue power LED on the LiPo SHIM, or is a soldering iron my only option? -Jeremy Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
Inky pHat issue
@wisptec wrote: error.png1330×639 99.7 KB This is the error I get when i try to install the pHat curl bash script. Please help it wont load and its a fresh new raspbian image Eli Posts: 1...
View ArticleAutomation:bit and touch
@nickine9 wrote: I have an automation:bit which works well for turning things on and off but now I want to add a simple touch control. in the past I have used a routine which averages analog reads to...
View ArticleFanshim automatic.py preempt bug
@Steve wrote: I think there’s a bug in autmatic.py My output> sudo python3 automatic.py --threshold 60 --hysteresis 10 --delay 1 --preempt --verbose Current: 38.46 Target: 60.00 Freq 1.50 MaxFreq...
View ArticleError installing fan shim software
@Feek wrote: Hi folks. I’m getting this error when I run sudo ./install.sh with the fan shim software pi@raspberrypi:~/fanshim-python $ sudo ./install.sh Traceback (most recent call last): File...
View ArticlepHAT BEAT RGB on 100% randomly on powerup
@HeadLess wrote: My pHAT BEAT pivumeter doesn’t work right. Visually board looks OK, but: On every boot (after the initial curl https://get.pimoroni.com/phatbeat | bash full install) random...
View ArticleUsing on-off shim with pantilthat
@skypickle wrote: what is the recommended way to physically attach both these hats to a raspberry pi 3B+? Since the pantilthat only uses 2 pins over I2C, it does not conflict with the pins the on-off...
View ArticleUbercorn matrix 2x1 - configuration problem!
@gferrari wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View Article