ExaGear replacement?
@vcurtis68 wrote: Hi, I understand the Eltech company which used to sell ExaGear Windows emulation has closed down. Does anyone know of a similar product to allow Windows 32bit apps to run on the...
View ArticleExaGear request
@vcurtis68 wrote: Hi, I would be very appreciative if someone could send me a copy of ExaGear with a licence key. File name is exagear-desktop-rpi3.tar.gz Thank you Posts: 1 Participants: 1 Read full...
View ArticleThe resolution of pantilthat
@malatif wrote: I am using pantilt hat with rasberry pi 3 b+ I want to know the resolution of controling angles of pan and tilt motors? Is it one degree integer? I need to use it for a very small...
View ArticleInternet radio
@herb wrote: I have assembled the pimoroni radio, created an SD card for it and applied power but there is no lights or or any indicator it is working… In the instructions it does not indicate the...
View ArticleClik here to view.
Pantilthat does not move with raspberry pi 3
@drroboto wrote: Here is the code: import pantilthat as pth import cv2 import time pth.clear() pth.servo_enable(1, False) pth.servo_enable(2, False) time.sleep(2) pth.servo_enable(1, True)...
View ArticleHyperpixel 4 doesn't work on Rasp Pi 3b+ nor my Rasp Zero W - screen doesn't...
@comeonwork wrote: I installed the Hyperpixel 4 on both units, reflashed using both raspbian full and raspbian lite. Followed the instructions here :...
View ArticleOfficial RPi PoE HAT v2.0 and Pibow Coupé 4
@RFernandes wrote: Thought I’d found the ideal case solution for my RPi 4’s with PoE HAT’s, then read it’s not a perfect fit, hear hoping a solution’s in the making, if so, please do tell, so I can...
View ArticleProblem with PMS5003 particulate matter sensor
@marjon wrote: I have successfully run the one line python library script and attached the particulate sensor to the enviroplus. I then tried running the various python examples. However,...
View ArticleNoisy fan-shim
@reverendo wrote: Hi everyone, I recently bought a set with an RPI4, PSU, Ninja Coupe’ cover and a fan-shim. After assembling and powering up the device, I had to check 3 times to make sure the...
View ArticleAdafruit I2S Stereo Decoder - UDA1334A (only working when WSEL or BCLK...
@AndyCap wrote: Hi Guys, I have this wired up to a Teensy 4 (3.3v), when powered on the only thing that was coming out of it was low level white noise. The test application is trying to output a sine...
View ArticleMLX90640 read/write frame error
@amorphous2111 wrote: Hi everybody,cd cd I am new to Raspdskjadsdberry Pi and Linux and Pimoroni. So I bought a MLX90640 for a small project and tried get it run on my Raspi B 3. After following the...
View ArticleClik here to view.
Quick question re Pi 4 & TV hat
@mihailolja wrote: Hello I assume I need to purchase the header below to fit my TV HAT on my PI4? shop.pimoroni.com 2x20 pin Female GPIO Header for Raspberry Pi – Pimoroni Store Connect your project...
View ArticleNew RPi4 not booting or showing image with FAN SHIM installed
@davifah wrote: I have just bought the new Pi 4 4GB and I’m powering it with my old 2,5A official pi3 power supply and a usb-c adapter. The red LED turns on and the green LED blinks, however neither...
View ArticleAdapting the Enviro+ to use an sds011 particulate monitor
@precociousmouse wrote: Hey all, I have just picked up an enviro+ hat, and I have an existing SDS011 particulate monitor. I know the hat has a cable out for the PMS5003, but has anyone successfully...
View ArticleRaspberry Pi 4 Wont Boot Up or Display
@Hallathier wrote: I recently got the Raspberry Pi 4 (4gb). I downloaded the OS to load onto a 128gb micro SD card and continued with set up. Both on my TV via HDMI and computer monitor nothing comes...
View ArticleHDMI 8" IPS LCD Screen Kit flickering
@Racecarver wrote: Hello everyone, I’ve bought three HDMI 8" IPS LCD Screen Kits a week ago. I want to build something for my flight sim cockpit. To connect them to my PC I use three USB to HDMI...
View ArticleClik here to view.
MLX90640 Thermal Camera: noisy framedata
@capstone2020 wrote: [Album] Imgur I’ve replicated the routines and functions from the MLX90640 API in python extracting frame values using smbus2. It was working very well for a while, but when I...
View ArticlePMW3901 stops sending valid data
@naty wrote: Hi , I am using the PMW3901 Optical Flow Sensor Breakout, it seems everything is working fine but after a few hours/days the quality decreases (for the same surface from 150-200 to ~50)...
View ArticleOnOff SHIM on Pi3B+ using toggle-switch
@Lokalhost wrote: I received my OnOff SHIM today and installed it on my Pi3B+. It works flawlessly using the included push-button or an arcade-button attached to the breakout-pins. BUT :-) I would...
View ArticleHelp in diagnosing pHAT DAC no-sound issue. Faulty HW?
@acolyte wrote: Trying to get Mopidy with Spotify to work on my RPi Zero W and pHAT DAC. I’ve followed the Pimoroni guides for both, using the single line simple setup procedure. I just can’t seem to...
View Article