Automation PHAT Schematic
@j3270 wrote: Is the schematic available for the board? Thanks, Posts: 2 Participants: 2 Read full topic
View ArticleProblems while running sudo apt-get upgrade
@primat1112 wrote: Hello everyone, while running sudo apt-get upgrade, I am facing this issue related with PIglow: The following packages will be upgraded: python-piglow 1 upgraded, 0 newly installed,...
View ArticleLED shim + Pi case
@GaryHomewood wrote: Hi I’ve got the excellent LED shim working but the Coupe Pi case I have blocks out the LEDs. Does the booster header https://shop.pimoroni.com/products/booster-header fit with the...
View ArticleMotioneyeOS and Pi Zero..Any issues?
@Crowbot wrote: I have Motioneyes running on an old Pi B just fine. Would there be any issues switching to a Pi Zero? TIA. Posts: 7 Participants: 3 Read full topic
View ArticleCannot import name 'Noise' from 'enviroplus.noise'
@ansa wrote: Hi, I’m struggling with the noise library for the enviro+ hat. I managed to clone it using this command: git clone --branch noise https://github.com/pimoroni/enviroplus-python.git...
View ArticleADS1015 +/-24V ADC breakout, pinout issues
@tardis79es wrote: Hi, I’m trying to figure out how to connect this breakout, but the code is not helping too much. So i’ve decided to trial and error by connecting A0/A1 to +12v/0 and A2/GND to...
View ArticlepHAT DAC Produces No Sound for Certain Audio Files
@evansste wrote: I’m running Raspbian Stretch (release 9.8) on a Raspberry Pi 3, and have learned that my pHAT DAC won’t produce sound for certain audio files. All of my .mp3 files, which I bought and...
View ArticleEnviro+ humidity wrong values
@jparbel wrote: I bought a Enviro+ from Elektor International Media BV. All reading values are good, except humidity. The values are always below 30%, right now 20% by raining weather, right value...
View ArticleHDMI 8" IPS LCD Screen Kit (PIM372)
@mousemat wrote: I have the HDMI 8" IPS LCD Screen Kit (PIM372) which works perfectly for my purposes, but powering int via USB is not ideal as I have a nice 5V supply available in my project. The...
View ArticleClik here to view.
Problems Assigning USB type to teensy 4.0
@sievemaster wrote: Hello there. I have an issue with the arduino IDE, specifically assigning a USB type to my teensy 4.0 board. I want to assign it as a USBMIDI device, but for some reason it only...
View ArticleFan Shim blocks I2C
@PiTinker wrote: With nothing on the GPIO pins (including no fan shim) the I2C works normal. sudo i2cdetect -y 1 completes all addresses near instantly. Mount the Fan Shim, mechanical only - no...
View ArticleAny new Pibows planned for the Pi4?
@jonny_m wrote: Hiya, I was wondering if you good Pimoroni folks might be planning any new PiBow cases for the Pi4 in the coming months? The coupe ones are great but they don’t protect the Pi quite as...
View Article30 Pin Header on 10" LCD Installation
@equals1 wrote: Hi there. I’m trying to set up my 10" LCD display. The ribbon cable that connects from the board to the screen comes disconnected. I’m having some trouble figuring out how to connect...
View ArticlePirateRadio location of playlist
@heimi wrote: I installed pirate radio from th one liner provided in the tutorial. It worked find with the stations in the default playlist. Following the recommodation in the README at github I...
View ArticleCan I run Enviro+ and FAN Shim at the same time?
@LDighera wrote: On a Raspberry Pi 4B 4GB RAM, under Raspbian Buster will there be bus contention or other issues with the FAN Shim and Enviro+ installed at the same time? Posts: 1 Participants: 1...
View ArticleEnviro+ all-in-one script with added csv writer
@CiaD wrote: Hi Has anyone any idea how to get the enviro+ readings to export to a csv file? I tried a but of code myself but it did not work. I am new to coding so any help would be great. Posts: 1...
View ArticleClik here to view.
OnOff SHIM with analog switch
@cypresstwist wrote: Hi. I have an analog button that toggles to always On and always Off. Looks like this: 261632×1224 1.87 MB I was wondering how could I make the OnOff SHIM work with it so that...
View ArticleNew PI TV HAT installation malfunctioning
@pilon wrote: Just bought a PI TV HAT, fitted to Raspberry PI 2B, innstalled Raspian Buster from sctratch, set up with TV Headend as per guide and tuned into London, Crystal Palace Tx. All channels...
View ArticleUnicorn pHat Issues
@PaulH wrote: Hello there, I’m having a few issues with the Unicorn pHat code at the moment. I’m running through the examples and when I type the code into the terminal everything works fine. However...
View ArticleClik here to view.
Pan Tilt Hat Motion Eye OS action buttons
@alphanumeric wrote: I’m trying to get my Pan Tilt Hat working in the latest Motion Eye. To do this you have to create Action Button Files and put them in a specific location. Problem is I can’t find...
View Article