Pirate Audio screen problem
@faster_martyr wrote: I finally got audio working on my headphone dac version of the Pirate Audio but now I have an issue. I’m exclusively going to stream internet stations with it and want to know...
View ArticleFlotilla problem on Pi4 under Buster
@JohnL48 wrote: I am trying to use my old Flotilla kit on my new 4Gb Pi4 under Buster. I edited the install file as advised elsewhere on the forum and this seems to run ok - well, rockpool appears in...
View Article7" Touchscreen backlight only dims (solved)
@foxbow wrote: Hello, my touchscreen works fine, I got the rotation properly for the case and touch works as expected, only the backlight can’t be dimmed below a certain point. All the following: DPMS...
View ArticleClik here to view.
Pianohat doesn't play notes below 48.wav
@thutches wrote: Just bought the Pianohat but it will not play notes below 48.wav (G#) on any octave scale. Keys light up but no wave file is printed. Its as if those sounds were never loaded. I also...
View ArticleRV3028 RTC not passing time to Raspbian?
@alphanumeric wrote: I ran sudo pip install rv3028 and sudo pip3 install rv3028. Then ran the set-time.py file. And get-time.py shows the correct time. Raspbian isn’t getting the correct time from the...
View ArticleAny warranty on the official Raspberry Pi 3A PSU?
@stuartxpowell wrote: Good morning, everyone. I have a 4GB Raspberry Pi4 purchased back in June. It has been running like a champ until yesterday. I ran it down and unplugged it, moved it to another...
View ArticleClik here to view.
Adafruit Mini PiTFT setup
@Crowbot wrote: I ordered one of the Mini PiTFT displays and I noticed this in the setup docs: warning1680×370 82.9 KB Am I correct that when they say “Kernel” they are referring to the OS software on...
View ArticleProblems with HDMI and Picade in Raspi4
@iOtero wrote: I have the picade with an 8 "monitor and a raspberry pi 4 with the pimoroni USB-C charger. In the microsd I have Raspbian Buster. I do not use Retropie. I use Attract-Mode as frontend...
View ArticleDisplay-O-Tron Hat issue with lcd
@retroisbest wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Does the RPi4 heatsink work with Pi 3B?
@mgaved wrote: Will the Aluminium heatsink for the RPi4 work with a Raspberry Pi 3B or 3B+? thanks! trying to keep some RPI 3Bs and 3B+'s working in a remote tropical location. Part no. COM3100...
View ArticleCAD file for HDMI 8" IPS LCD SCREEN KIT - 1024X768?
@GregS wrote: Are there CAD files for the 8" HDMI LCD screen and its components? I’m trying to create a cabinet for the screen and an FPGA using laser cut acrylic. Thanks. Posts: 2 Participants: 2...
View ArticleMotor Speed
@bstrimmenos wrote: Rotation speed is different on one of the motors. After one hour of usage where everything was ok, suddenly one motor spinning slower than the other. The setup speed is the same. I...
View ArticleEnviro:bit LEDs don't appear to light up
@aidancuckoo wrote: For some reason, the enviro:bit LEDs don’t seem to light up. Any idea why? Posts: 1 Participants: 1 Read full topic
View ArticleNewbie question script not executed on reboot
@paih wrote: Hi, I bough my enviroplus and got it all set up and running with my raspi zero WH, despite not having a clue about linux, but Google helps a lot. To get things working with the Luftdaten...
View ArticleSPI vs I2C on Breakout Garden
@Crowbot wrote: I have my new Breakout Garden mini to make a weather station. I have the BME680 and the 1.12" OLED SPI. I verified that the BME680 and LCD work individually. The example in the BG lib...
View ArticlePi3 won't boot up (Green light flashes four times)
@DreiAugenFrosch wrote: Hey there! I got the Picade for Christmas and I set it up. Now I have two problems. First, I had a constant red light, but no green. So the pi didn’t boot up. I bought a new SD...
View ArticlePiCade - Retropie 4.5.1 won't boot on Rpi4
@Maxik wrote: Hi All - I’m looking for some help on a brand new PiCade I just built. I have just built a PiCade (8inch screen) using a Raspberry Pi4, and it boots fine into Raspian Full. However, when...
View ArticleClik here to view.
Pan-Tilt HAT not achieving 180 degree range of motion in pan or tilt
@Heapsheeps wrote: Upon getting the Pan-Tilt HAT set up, I have not been able to rotate ±90 degrees in either servo. I’m seeing roughly 145 degrees in the pan direction, and less (maybe 120) in tilt....
View ArticleClik here to view.
Picade 8 Inch Buttons, Joystick and Speaker not working
@MrRetroGeek wrote: Hello, I recently purchased a Picade 8 Inch and after I assembled it, I noticed that the buttons, speaker and joystick didn’t work. I tried downloading the Picadehat software and...
View ArticleClik here to view.
Aluminium Heatsink Case extra thermal pads?
@nophead wrote: The instructions for the case say to just use a pad on the CPU and keep “the other” as a spare but I received three different sized pads obviously intended for three different chips....
View Article