PanTiltHat current load
@calleblyh wrote: How much currentload milliamps can I safely expect to drain on the three ports LIGHT, SERVO1 and SERVO2, without causing damage to pantilthat baord or the RPi3B+ I intend to use. Is...
View ArticlePicade button mapping problems
@Madmain wrote: Hi guys, I’ve just got a picade for Christmas, I set it up the other day and have put in a preloaded sd card. The problem is when I set the button configuration it doesn’t set the...
View ArticlePms5003
@Lodgemoorlad wrote: Hi guys I have just read this amazing project about using the above and the enviro+ to monitor the quality of the air in the environment....
View ArticleClik here to view.
ADS1015 ADC - how can it measure 24v?
@Pengu1 wrote: Hi I have a simple question - just purchased your shop.pimoroni.com ADS1015 +/-24V ADC breakout – Pimoroni Store This ADS1015 ADC (analog-to-digital converter) breakout has three...
View ArticlePMS5003 - Enabling to Enviro+
@AnneC wrote: Hi, I need an idiot’s guide in plain English pls. I’m using an Enviro+ and a Pi Zero WH (with Raspbian Buster updated and upgraded) and have got the Enviro+ working perfectly with the...
View ArticleHyperpixel 4.0 touch on raspberry pi 2
@TheEvPatch wrote: My screen has phone orientation for some reason and weird blue patches are everywhere also when I touch it it thinks a touched far of to the left of were I actually touched...
View ArticleAdafruit 16-Channel PWM / Servo Bonnet stops RPi from booting
@Stemmi wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticlePirate Radio Kit not working
@docnjt77 wrote: Hi I purchased the Pirate Radio Kit over xmas and I have installed it according to these instructions: https://learn.pimoroni.com/tutorial/sandyj/internet-radio-on-your-pirate-radio I...
View ArticleBoot Rpi 4
@alan wrote: Have recently got a Rpi4 boots ok, but when I shutdown, or reboot, it will not read the sd card. I am using the most recent OS, I have tried several different cards, but the only way to...
View ArticlePMS5003 connector with Enviro+
@AnneC wrote: Hi all, Has anyone else had a problem that the cable connector falls out of the PMS5003 particulate matter box. When it happens my Pi Zero reboots. The Enviro+ end firmly fixes in thank...
View ArticleEnviro:bit - Get noise level
@baunso wrote: I’m experimenting with the enviro:bit noise level using the function library made for the Makecode editor. When I experiment with pressure measurement, I know that the unit of...
View ArticleClik here to view.
0.96" SPI Colour LCD (160x80) Breakout direct GPIO doesn't work
@bdriesen wrote: Hi everyone, Looks like I’m facing one of the same issues that all the others have here on the forum, however no one ever posted an answer so hence why I’m writing this new post. I’ve...
View ArticleStupid question about the LVDS connector
@adailey7 wrote: So I recently purchased the 10-inch display upgrade for my picade. During assembly I noticed that the LVDS connector on the display driver was significantly bigger than it was on the...
View ArticleMeasure a resistance of a temperature sensor (PT100)
@Flixm wrote: hi, i want to measure the resistance of the sensor (PT100) any idea how to do that? thanks in advance Felix Posts: 4 Participants: 3 Read full topic
View ArticlePicade No power USB-C
@johp778 wrote: Hi, I’m using Raspberry Pi 3 model b, with Retropie, Picade X Hat and arcade button set. I’ve downloaded Picade software & mapped buttons, all seems ok, however I’m not getting any...
View ArticleFan shim & button shim together?
@JBlake wrote: Hey folks, was wondering how I’d go about adding a fan shim and then soldering some wires so I can remote mount a button shim. Both the fan and button shims share pin 5 so I imagine...
View ArticleFanshim threshold
@LudviG wrote: I was installing my fanshim yesterday, and followed the setup found on the pimoroni site. But the thresholds are higher than I want, but I can’t seem to change them with the method...
View ArticleBMS280 temperature readings way to LOW
@paih wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Coloured lines on Hyperpixel 4 / Raspberry pi 3b+
@onitsuo wrote: Hi there, I’ve bought an Hyperpixel 4 for my raspberry 3b+, first installation ok, everything looks great. Today i’ve decided to use it on another raspberry pi 3b+, new installation of...
View ArticlePirate Radio does not join wifi Access Point
@feh123 wrote: Hi I have a fully working Pirate Radio that I use when travelling. I have various portable access points (all RPi’s) that use RaspAP to create AP’s. However Pirate Radio fails to...
View Article