Hyperpixel 4 - Using I2C disables touch
@1x6vslbb8ww4 wrote: Hi, I’ve come across a weird issue - When I plug in an I2C board (the Adafruit GPIO expander bonnet) the touch stops working on my Hyperpixel 4. I’ve tried changing the address of...
View ArticlePi 3B+ USB Power cable?
@miketuk wrote: Is there a list of Pi 3B+ USB power cables that actually work? I am running this particular Pi from a 12-5.1v converter, and so far all the power cables have been a bit rubbish. I’ve...
View ArticleTradfri with raspberry pi
@Benny wrote: Dear forum users i’m curently following the learn guide to control tratfri with the rpi. After installing the coap libary I want to test it by running this command coap-client -m put -u...
View ArticleHyperpixel 3.5, Buster, Pi 4 how?
@HansOtten wrote: To check out the Pi4, current Buster (feb 2020) and Hyperpixel 3.5 I did the following: 0 Checked on a Raspberry Pi 3, current Buster, instructions followed and works fine, so...
View ArticleHttps://learn.pimoroni.com/tutorial/sandyj/streaming-spotify-to-your-pi
@zmsc1 wrote: https://learn.pimoroni.com/tutorial/sandyj/streaming-spotify-to-your-pi Just built this and all seemed to go well with the installation, but my browser gets no response when connecting...
View ArticleGfx lcd pn
@nick1400 wrote: Can anyone tell me the manufacturer and PN for the screen that’s on the GFX hat? Thank you! Posts: 3 Participants: 3 Read full topic
View ArticleRpi3b - Inky wHAT - Google doc input?
@Davearrrrr wrote: Hola! I’m very new to the Inky hats and I’d like to do a dashboard project that outputs various fields onto my wHat display. I’ve done the wHat tutorial but I’m not sure how to go...
View ArticleClik here to view.
Feather + Stemma / Qwiic breakouts?
@alphanumeric wrote: I’m looking at the Adafruit Feather STM32F405 Express shop.pimoroni.com Adafruit Feather STM32F405 Express – Pimoroni Store ST takes flight in this upcoming Feather board. The new...
View ArticlePIM372 Backlight
@RushHour wrote: Is there a way to enable/disable the backlight to save power on the PIM372 HDMI 8" IPS LCD Screen? (https://shop.pimoroni.com/products/hdmi-8-lcd-screen-kit-1024x768)? I see that I...
View ArticleInky Phat isn't updating screen
@twiclo wrote: I’ve tried to run the commands that get installed with the curl script. They run and print output but nothing actually happens on the display. I’ve soldered all the pins shown on...
View ArticlePicade Raspberry Pi 4 support.... Where?
@bolsoncerrado wrote: Hi, Got the picade cabinet kit with the 10inch upgraded + the usbc rpi4 supported version. Hardware was somewhat easy but the software part is misleading as the errata shows no...
View ArticleNeed help with Pi hardware suggestions
@BigRodney wrote: Hi everyone. Hey I’m working on a project and I need some help on hardware suggestions. And a disclosure I’m very inexperienced with this. So, I have a Pi 4b and I have a Hyperpixil...
View ArticleEnviroplus - BME280
@experiowill wrote: Trying to follow the enviroplus tutorial but get stuck here: Using the Python library The Enviro+ Python library has several parts to it and, in fact, most of the parts are in...
View ArticleEnviro+ sensors async read from sensors
@jorgevinagre wrote: Hi everyone I am currently developing a project where I want to integrate Enviro+ sensors with Azure IoT Central. The python SDK for Azure IoT Central is follows the async pattern...
View ArticleHyperPixel Color Banding on gradient images
@hyprodimusprime wrote: Hello, I am noticing that the HyperPixel 4.0 screen is displaying some color banding when there is a gradient image. It is not like this when I see the image from VNC (to the...
View ArticleHyperpixel 4.0 (non-touch) Pinout Question
@ilikecake wrote: Hi, I am working on a project that uses the Hyperpixel 4.0 non-touch version. I have found what I think is the pinout here. It appears that pins 13, 19, and 23 are used for the touch...
View ArticleEnviro Featherwing and ESP32 Feather?
@HamishCunningham wrote: Howdy, I imagine that it is hard to get the example code for the new Enviro Featherwing to work on ESP32? (Because CircuitPython requires a Feather with USB host support, or...
View ArticleHT0740 Breakout Wiring
@pnbv wrote: Hi, Concerning pimoroni’s HT0740 Switch Breakout, could someone help me with wiring? The breakout has + - markings but I don’t know if I should place the device being switched on one or...
View ArticleUse Octocam to control mains using 433MHz
@windy54 wrote: Hi, So I have got an octocam running opencv on Buster functioning as a burglar alarm, cpu loading around 60%. I have used 433MHx TX’s to control mains equipment using a B2 model so...
View ArticleRetroPie + HyperPixel 4.0 + Rpi4
@BlueZumbrellas wrote: Heya all! Has anybody had any luck using the HyperPixel 4.0 with Retropie on a Pi4? I’m having trouble getting the rotation to work. I’ve gotten emulationstation to display...
View Article