Adafruit Voice Bonnet for Raspberry Pi -Two Speakers + Two Mics
Hi there, can you please advise if your 4 ohm, 3W speaker will work with the adafruit voie bonnet output ? If you can you suggest an appropriate speaker. Thanks ! 1 post - 1 participant Read full topic
View ArticlePower supply for Trinket M0
I am going to use a Trinket M0 with a Neopixel ring (16 LEDS’s). I understand that the Trinket needs a voltage of 3.3v DC but the Neopixel needs 5v DC. If I get a power supply for the Trinket at 3.3v...
View ArticlePimoroni Blinkt with RPI4 and Groovy Gorilla
Hi everyone, is there someone who can point me in the right direction to make a Pimoroni Blinkt work on a raspberry pi 4 ? I’m a newbee to this hard- and software, but I like to experiment with it....
View ArticleEnviro Plus - Playing with Noise sensor
Hi I am a new user of the EnviroPlus PIM486 I have all the example files working well - but I am not too sure how to understand the noise sensor’s output. github.com...
View ArticleClik here to view.
Adafruit APDS9960 -AND/OR sensor
Hi there, I’ve got this rascal blu-tacked up by my desk: shop.pimoroni.com Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor – Pimoroni This breakout is chock full o' sensors! Add basic...
View ArticlePimoroni Keybow - Help with Key Configuration
Hello, I wanted to change a key configuration so that as long as I keep pressing the key, the volume of media will decrease/increase constantly. What code could I use for this? Cheers! 1 post - 1...
View ArticleApt failed to update indexes - Hyperpixel4
When running the hyperpixel4 install script i get the error: E:failed to fetch http://http.re4son-kernal.com/re4son/dists/kali-pi/InRelease Clearsigned file isnt valid, got ‘NOSPLIT’ (does the network...
View ArticleStrange Keybow Issue
HI Everyone, I have been using a Keybow on and off for about 18 months and on the whole it works well, however I have come across an irritating issue that has stated since I have started using it...
View ArticleChange Pimoroni Account Password
I need to change my Pimoroni Account password, but can’t seem to find where to do so. A little help or a direct link to the page with this option will be greatly appreciated. Thanks in advance! 4...
View ArticleInky Impression Display
Hi, I am looking at purchasing the Inky Impression :- https://shop.pimoroni.com/products/inky-impression I am looking to use it to display photos and I liked the idea of using this type of display to...
View ArticleKeybow Mini Backslash key entry
Hi All, I’m looking for some assistance with the Keybow Mini programming. I’m using a US keyboard in the uK and one application I use often has issues with the fact i have to use AltGr + hash to enter...
View ArticleBME680 reading values using c Code
I am trying to get my BME680 sensor working using c code, i just need a program to record the sensor values at intervals and save the data to a file, i have tested the sensor and it works correctly...
View ArticleClik here to view.
Pimorini EnviroHaT mini LTR559 sensor not working with only I2C connection
Hi, I have a Enviro HaT mini from Pimorini. I wanted to use only sensor like BME280 and LTR559 for my project with Pico Hat mini connections so that I can plug in Automation Hat with main header. When...
View ArticleHyperpixel touch position
How to read touch position on hyperpixel? 1 post - 1 participant Read full topic
View ArticleHow to manually wire Pan-Tilt HAT to Raspi 4
Hi there! I want to manually wire the Pan-Tilt HAT to my RASPI (it’s part of a bigger setup, so just pluging it in does not work). Can someone please share some info on which ports to connect. Thanks!...
View ArticlePimoroni IPS LCD shows a faint red letter E
I purchased a Pimoroni 8" IPS LCD screen and put it together to test. When I’m able to get the screen to work (oddly, does not work when the ribbon cable is laid flat), I see a faint red letter “E” on...
View ArticleMicro:Bit Starter Kit Screwdriver requirements
Hi all, I’ve purchased a Micro:Bit Starter Kit as a gift, and I see the required tools state Phillips screwdriver and flat head screwdriver. Can anyone advise what size? I just want to make sure the...
View ArticleClik here to view.
The Vertex Delta 3D printer is great! BuildTak tips?
I’m totally new to 3D printing and decided to take advantage of the Black Friday deals to get involved - I know the Pimoroni crew only sell booty they would use themselves so I took the plunge, and I...
View ArticleWhat is the needed size of the JST 2-pin connector on the Grow?
I recently bought the Pimoroni Grow and was looking to hook up a 5V pump to three male 2-pin JST connectors on the bottom. Can anybody confirm what is the needed JST connectors? For example these ones...
View ArticleEnviro+ with Honeywell Particle Sensors
Hi, I’m looking at purchasing some Enviro+ devices and wonder if they work with the Honeywell Particle Sensors e.g....
View Article