Picade 10" Pi4 No signal [SOLVED]
So I recently picked up a 10" Picade however, I have been having problems with the display. I uncommented the “hdmi_force_hotplug=1” line in the /boot/config.txt file and I still get “No Signal”. For...
View ArticleClik here to view.
Pi 0 pHAT Ribbon and Enviro Plus connections
I was on Enviro PHAT Temp & pHAT Stack trying to figure out how to plug a Pi0 with a pHAT stack, through a Ribbon and then the Enviro Plus. I can’t get my head around it…as my setup is slightly...
View ArticlePicade help
Hi guys, I just finished my Picade whit raspberry pi 3 and I have so much questions. First when I plug in the picade the display is blue. I tried everything that I found in the forum but maybe I doing...
View ArticleRGB Potentiometer - non-RPi use case
Hi everyone, I recently purchased one of these RGB Potentiometers here: https://shop.pimoroni.com/products/rgb-potentiometer-breakout My intention is to connect it to my home-made Z80 computer via...
View ArticleNew Picade - audio problem - volume stuck at 100%?
Hi, I’ve just got a new 8-inch Picade (the one with USB-C XHAT) and - aside from a faulty power switch, which i’m currently bypassing - all is well, except that I can’t change the volume! It’s very...
View ArticleRaspberry Pi 400 US spacebar remains pressed
Hi, I just received the RPi 400 US version yesterday, and I felt the key moving strangely when I pressed the spacebar back. Eventually, when I pressed the center of the spacebar, it stayed pressed and...
View ArticleSent message, no reply yet
Hi, I sent a message using the ‘other’ part at the bottom of the contact us page on Friday morning. I would appreciate a reply to it please. Thanks 3 posts - 2 participants Read full topic
View ArticleClik here to view.
Unicorn pHAT and Buttons
Hello there, I have a project in mind that utilises a Pi Zero, Unicorn pHAT, and buttons. Would it be possible to connect 4 buttons to a Zero and Unicorn pHAT that control the power, colour of the...
View ArticleRV3028 losing time, worse than specificaitons
Hi I’m using a RV3028 module as a realtime clock in an Arduino Nano project. The RTC code is using the RV-3028-C7 Arduino Library by Constantin Koch. Initialised as: Wire.begin(); if (rtc.begin() etc...
View ArticleLaser Printer
Just bought a Raspberry Pi400 and updated the OS to the new Dec 2020 release. I am trying to get it to talk to my Brother DCP1612W mono laser printer. I have installed the correct Linux driver from...
View ArticleHyperpixel 4 on RPi 400 -- rotate console?
Hi all I’ve plugged the Hyperpixel 4 into a rPi 400, and the console is in portrait mode. Is there an easy way to display the console in landscape mode? I can boot X and use the hyperpixel-rotate...
View ArticleUse Pirate Audio Lineout with Pi 4 Bluetooth?
Hi, apologise if it’s a stupid question, I have a Pi 4 and want to try the Pirate Audio Lineout for improved music streaming quality (I already have a nice pair of wireless Dynaudio speakers). The...
View ArticleEnviro+ and gpio #4
Good afternoon. I use the Enviro+ with the PMS5003. On the hat, gpio pin #4 is accessible. Is it free for me to use freely, or is it connected internally or to the PMS5003 ? Thanks for advising....
View ArticleAdafruit powerboost 1000c
I have a new PowerBoost 1000c. I plugged it into a 5V 2A power supply and a 6600Ah battery for a few hours and all seemed well. Within a few after connecting a load (raspberry pi w), it became...
View ArticleMeasure multiple batteries
G’Day I’m working on a project to measure my boat batteries all 12V. I have five in total. Is there a way to connect two HAT mini to gain 6 ADC input ? The batteries are in parallel as all equipment...
View ArticleFaulty bme680 breakout?
Hi all, I’ve recently purchased the Pimoroni bme680 breakout, and it’s behaving unexpectedly. Running the “read-all.py” script stops returning correct values after an indeterminate period of time...
View ArticleFanShim and built in Raspberry Pi OS software fan controller
So now that the RPi foundation sell their own fan I noticed in raspi-config that the software to controll it is now in there. When you set it up it seems to ask what GPIO pin to usefor the pwm...
View ArticleMap the buttons of the phat beat to the musicbox_webclient
Good day all, does anybody know if and how we can map the buttons of the phat beat to the musicbox_webclient plugin of mopidy in order to do next/prev with the audio streams ( tunein links e.g. )...
View ArticleAutomation-Hat Digital Inputs
Hi, I am new here. Last week I buy an Automation-Hat. The python library works fine. I have question to digital inputs. In the python library the Inputs are set with floating input. If you have long...
View ArticlePython libraries Automation HAT mini and RP 4
(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) 1 post - 1 participant Read full topic
View Article