Combine automation HAT MINI and BME280
Hi, Is it possible to combine an automation HAT mini and the BME280 or do I need to buy a RP for each module I need to use ? Henrik 2 posts - 2 participants Read full topic
View ArticleOne Snowflake flashes Led all the time
I appear to have a fault with one Snowflake. If its the last in the chain, it flashes a single Led but the other 4 work fine. If I put it as the first then all 5 flash a single Led. Cables and...
View ArticleQuestion about Snowflake light patterns
Hi, has anybody come across a description of the modes of the Snowflake lighting decs? I’ve come across the video from Luck Resistor that goes through the 11 modes, they are all very nice and look...
View ArticleClik here to view.
Hyperpixel 4 doesn' start
Hello, Today I got my new hyperpixel 4, I install the newest operating system on my pi3B+. After that I run “curl https://get.pimoroni.com/hyperpixel4 | bash” script, but The display doesn’t working,...
View ArticleSinmark Handheld 2D & 1D USB Barcode Scanner
The Barcode Scanner is ok, but when i’m scanning qr-codes, there is no backslash in the url; how can i change the character set ? (My keyboard setting is german, (qwertz)) 1 post - 1 participant Read...
View ArticleADS1015 on Enviro+ FeatherWing?
The Enviro+ FeatherWing description says it has a: ADS1015 analog to digital converter (ADC) I can’t see that on the board and I’m not sure what its purpose would be given the relevant Feather boards...
View ArticleUnicorn Hat Mini Not Lighting Up
(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) 1 post - 1 participant Read full topic
View ArticleUnicorn Hat not lighting up at all
I just got my Unicorn Hat (PIM054) and installed it on a Raspberry Pi3B+. Everything on the pi is up to date. I ran several examples after the installation and nothing happens, none of the leds turn...
View ArticleWanting to rotate display on hyperpixel (non touch)
Hey everyone I just got the Hyperpixel. I want to rotate my display via terminal. however when I add display_rotate=2 to config.txt nothing happens after I reboot. I could simply do this with the...
View ArticleLTR-559 Details
I plan to use the LTR-559 breakout with an ATTiny mcu, rather than a Raspberry Pi, coding on the Arduino IDE. As things stand I can get only part way using a combination of the Python code example and...
View ArticlePIM447 Trackball - power consumption
Wondering if someone can tell me the power consumption of the trackball breakout. Does the firmware running on the Nuvoton MCU use any low power mode? 1 post - 1 participant Read full topic
View ArticleTime sensitive - Raspberry Pi or Micro:bit for 9yo?
Hi, would a raspberry pi or a micro:bit starter kit be more appropriate for a 9yo? Kiddo has some Scratch experience, very little hardware experience (beyond circuits), mother used to programme in...
View ArticleBreakout
@alphanumeric Now I hope it is so ok. 2 posts - 2 participants Read full topic
View ArticleProblem with a small screen (7 inch)
Dear Mr Moroni I have a Raspberry Pi 4 B and a 7 inch touch screen monitor that I bought from Pimoroni. I am using Ubuntu on it, though I had the same problem when I was using Raspberry OS. Here is...
View ArticleClik here to view.
RGB Encoder Breakout - Register Map (Seeeduino Xiao)
Hi, I’ve just got this : https://shop.pimoroni.com/products/rgb-encoder-breakout (An RGB encoder breakout board.) I’m using it with a Seeeduino Xiao, so unfortunately the on-line examples don’t quite...
View ArticleMini breadboards question
Are there any power rails on these mini breadboards as I can’t see them. Thanks 3 posts - 2 participants Read full topic
View ArticleKeybow - specifying "+" and "-" on the numpad
I’ve completed my Keybow build and after some tinkering I’ve got a good layout figured out. The video editing software that I use recognizes the plus/minus keys on the top of the keyboard, and the...
View ArticleEnviro+ installation script error
When running the One line intall script for Enviro+, curl -sSL https://get.pimoroni.com/enviroplus | bash I got the error text as pasted below. The script continued, so may have recovered. Is this...
View ArticleSnow Flakes, data signal?
I just received my Lucky Resistor Snow Flakes. I have one that does not respond to the button unit. If it’s the first one in the chain non of them will respond, button presses do nothing. It does the...
View ArticleClik here to view.
Powering Enviro+
Hello, Can I power the Enviro+ and the Pi Zero together from the front Enviro+ GPIO 5v and GND connections? Thanks Ian IMG_82853536×1653 1.09 MB 4 posts - 2 participants Read full topic
View Article