AUTOMATION HAT IOError: [Errno 5] Input/output error
@datsun wrote: Hey all, I just bought the automation hat and tried to get it to work on my raspi, I installed via the one liner:curl -sS get.pimoroni.com/automationhat | bash Once it got everything...
View ArticleRun a Micro Dot pHat without a Pi
@smssms wrote: Has anyone run a Micro Dot pHat on anything that is not a Pi? As it is just an I2C interface is there any reason (apart from supported libraries??) that I could not run it from a...
View ArticleEnviro PHAT single analog output syntax
@monglet wrote: Hullo me hearties. Could anyone suggest the correct python syntax for pulling a single analog value, rather than all 4 values? Can't find it anywhere in the documentation. Ta muchly...
View ArticleMote Lumens and Watts
@SonicKidding wrote: With four mote sticks at full brightness, what are the Watts and the Lumens? Posts: 2 Participants: 2 Read full topic
View ArticleAdafruit Capacitive Touch Hat
@gezing wrote: Hi all, I need your help!I connected Adafruit Capacitive Touch Hat and I can see the LED light is on the Hat so I believe it's well soldered and connected properly with Pi. But what's...
View ArticleGeothermal Livestock Water Tank Temp Activated Pump
@luciphil wrote: I want to build my first Internet of things device that will have a temperature sensor in the water tank for my herd of Tibetan Yaks such that when the water drops below say 40...
View ArticlePower Pi over USB while ZEROLiPO is connectet
@Gumboss91 wrote: Hi all, I have solder my ZEROLiPO direct to the Header on my PiZero. It is now possible to power the Pi over USB?Will the on-board Power-converter be damage the ZEROLiPO over...
View ArticlePropeller hat expansion
@daniego wrote: Hi,I'm looking to use the proleller 30 pin as PWM.I'm getting a bit confused on how to get it working, I followed https://github.com/pimoroni/propeller-hat/tree/master/documentation...
View ArticlepHAT DAC on PiZero no sound. Software vs hardware?
@trymbeck wrote: Installed pHAT DAC using the simple setup approach. Press-on only at the moment - wanted to check all OK before soldering. No sound. Have run two tests: lsmodshows...
View ArticlePhat dac speaker-test works but nothing else does
@Whitstraw wrote: Hi thereI have been messing around with the phat dac for a little while trying to get audio out. I have no network connection (yet) on my Pi zero so I am using the manual config...
View ArticleUSB mount has interfered with DOTHAT startup
@philipok wrote: Hello all, I recently mounted a USB drive on my pi to store backups of my home folder. After fiddling around I decided to bin the mount and removed the fstab entry etc. After this I...
View ArticlePHat DAC install causes Processing to stop working
@colinj wrote: Howdy all, I'm running in to a problem when I install the PHat DAC on a Pi 3 and then try an use Processing. I've got a Processing script that will play MP3s and display some nifty...
View ArticleHC SR04 avec Explorer Hat Pro?
@benoit wrote: Bonjour à tous.J'aimerai savoir si quelqu’un d'entre vous a déjà réaliser un montage avec un capteur ultrasons (HC SR04) et un explorer hat pro ?Merci de votre réponse Posts: 2...
View ArticlePiTFT installed, limited hdmi display
@MartinB wrote: HelloI've just installed a PiTFT Plus 480x320 3.5 on my Pi 2BI did the usual update / upgrade first and then went through the links from the Pimoroni site and followed the easy install...
View ArticleVNC between Pi 3 and Pi 0
@BeardyMcNormous wrote: Hi guys, hoping someone can help me or point me in the right direction. What I'm trying to do is VNC from my Raspberry Pi 3 to my Pi 0 over USB. I have the 3 connected to HDMI...
View ArticleExplorer pHAT install script double failure
@pi_dummy wrote: (I feel those are common issue to your installer that might occurs for any other board and unrelated to explorer) I found a double issue with explorer pHAT install script. Where...
View ArticleDisplay-O-Tron 3000 on Raspberry Pi Zero?
@mrmeeseeks wrote: Since the Display-O-Tron 3000 is quite similar to the normal Display-O-Tron HAT I was wondering, if it's also possible to mount it on a Raspberry Pi Zero? It is mentionend that the...
View ArticlePibow + Sense Hat
@nemgreen wrote: Is there a Pibow case that's compatible with a Pi 2 + Sense Hat? One that accepts the Sense Hat internally with the option for a diffuser layer would be good Posts: 1 Participants: 1...
View ArticleAdafruit 2340 Capacitative Touch Hat Raspberry Pi too sensitive - how can I...
@David wrote: HI, I am using the Adadfruit Capacitative Touch board 2340 - most of the useful docs are for the MPR121 & indeed the software supplied is for that. I am using one pin, a wire...
View ArticleDoubts about Unicorn HAT + Pibow
@tharandur wrote: Hi! I want to buy an Unicorn HAT and a Pibow. Also I plan to put a diffuser layer on the top and a heatsink (I suppose that I have to buy the 6mm one...
View Article