Automation Hat GPIO question
@mac595 wrote: Hello, I'd like to use the automation hat along with a couple bussed DS18B20 one-wire temperature sensors. Could you tell me what pi GPIOs the automation hat is not using and would be...
View ArticleDot3k + UPS PIco HAT = buggy input
@robhubbard wrote: Howdy. Happy dot3k user here. When trying it in combination with the UPS PIco HAT however, there's a problem: the device thinks the 'up' button is being held, while it is not. I was...
View ArticleScan other type of barcodes
@TinkerBel wrote: Hello,is it possible to configure the barcode scanner to also read barcodes that are in the MSI format? Kind regards,Christophe Posts: 1 Participants: 1 Read full topic
View ArticleError with Scroll pHat installation
@wataruland wrote: Hi. First of all I apologize for my English I defend myself with reading but little more, but I have a problem with the "Scroll pHat" To date I have worked perfectly on a Raspberry...
View ArticledotHAT python can't find modules
@Uridium wrote: Hi,First post here :)I just got a DisplayOTron HAT to play with and everything is working fine but I am having trouble running the advanced examples.demo.py works fine but when I run...
View ArticlepHAT DAC with LibreElec
@StephCafe wrote: HiI am a bit of a newbe to the world of PiI have a bought a pHAT DAC so I can plug my Raspberry Pi 3 into my beloved 1980's Technics SU-V4X amp.I have a Pi3 running LibreElec with...
View ArticleAutomation hat install issues on pi3
@bfrosty wrote: IC2 detected at 48, but when I run any of the examples it cant find ads module 'ads1015' Posts: 2 Participants: 2 Read full topic
View ArticleRaspi doesn´t install easy installer updates (piglow)
@Kalle wrote: Hi,I downloaded, and started the "easy installer" by typing in: curl -sS get.pimoroni.com/piglow | bash. I did that several times, also with a Raspi1, and another Raspi2. I²C is enabled....
View ArticleZero horizontal artifact lines
@stuartiannaylor wrote: Just got my Pi Zero and just wondered is it just me or is there a problem on 1080p with artifcat problems. Generally there are green pixels on the screen that depending on...
View ArticleHelp - Face Recognition/OpenCV using SSH / VNC
@ChrisR wrote: I followed the instructions for PanTilt face-tracking. I don't have a monitor or keyboard so am using SSH & (tight) VNC. If I run the program from SSH I get...
View ArticleClik here to view.
Unicorn Hat help for a complete beginner!
@amysarahb wrote: Hi, This is probably a really silly question but I'm stuck and need some help please! I have just bought the Raspberry Pi 3 starter kit and a Unicorn PHat...
View ArticleClik here to view.
How can i find where my unicorn hat connection is shorting out on my rp zero
@dlorfel wrote: IMG_0516.JPG1512x2016 758 KB I soldered the pins on my rp zero, this is the third one I did and this one is not working. I am using the same software as i used with the other ones. the...
View ArticleDigital Sensors for the Picon Zero
@zcapr17 wrote: My first Raspberry Pi project is going to be a controller to tilt my Venetian blinds. I need to be able to control a number of servos and connect some sensors to measure light levels...
View ArticleHelp finding the right 8x8 LED matrix for arduino project
@Jo7474 wrote: Hi I'm trying to get some things to go with my son's arduino for dummies projects and have found some of the parts I need here but need help,with the 8x8 led matrix as I've already...
View ArticlePan-Tilt HAT and camera cable length
@Tomas wrote: Hi, What is the recommended camera cable length if I put the Raspberry Pi camera module on a Pan-Tilt HAT put on top of a RPi3 , like in the Pan-Tilt HAT product pictures? Is it enough...
View ArticleNew Pi 3 won't boot
@richarddmorey wrote: I just bought a Pi 3 complete starter kit. I slotted the microSD card, keyboard, mouse, HDMI, and power, and...nothing. No video and the LED is solid red (no blinking). Please...
View ArticlePi B + PiGlow + HDMI Pi housing = problem
@sooseeg wrote: Help! I've been asked by a local primary to do something with their collection of RasPis (housed inside HDMI Pi screens). Turns out they are Pi B (only 2 USB ports) with cards that...
View ArticleStacking different Hat or pHats on same unit
@UK_Ham wrote: Total beginner here and want to know what would be the best way of stacking multiple boards on the GPIO.I have just received my new Zero yesterday and and looking at various projects,...
View ArticleDisplayotron Santa countdown
@mypifi wrote: Im not very good with python so might be way off the mark here. But what I am trying to do is make a Santa countdown showing how far away Santa is in Miles. Based in the uk I want it to...
View ArticleAuto... hat header pulled off when removed from hat hack3r
@bfrosty wrote: got my hat hack3r hooked up the zero and automation hat to the hack3r, no problems till I removed the automation hat. The header pulled of and stayed with the hack3r. Solder paste...
View Article