Speaker pHAT and Tivoli Model One
@kasper wrote: Hi After reading Sandy's blog post about the Roberts R600 radio (http://blog.pimoroni.com/the-pimoroni-arrr600-radio/), I have thought of hacking my old Tivoli Model One...
View ArticleESP IoT pHAT GPIO4 and 5 mislabeled on board
@tarun wrote: I had trouble getting GPIO4 and 5 to work properly on the board. I looked at the GPIO pinout for the ESP8266 and followed the traces for the GPIOs and they looked correct. I found out...
View ArticleSkywriter Hat not working on Pi3
@cleverclocks wrote: New Skywriter Hat Attaced to Pi 3, Have run:-$ curl -sSL get.pimoroni.com/skywriter | bash $ sudo apt-get install libx11-dev libxtst-devboth worked ok $ sudo pip install autopy...
View ArticleHow to wire fan (with ground and 12v cables) and power to automation phat?
@Benhackerman wrote: leading off from my last question how would i wire up a fan and 12v power supply to the automation phat? and what code would i use? Posts: 3 Participants: 2 Read full topic
View ArticleClik here to view.
Phat DAC and JACK
@datamads2 wrote: Hi everyone I have recently purchased, soldered and installed a Pimoroni Phat DAC on my Raspberry Pi Zero. After installing the Pimoroni drivers I did a quick test using Sox to play...
View ArticleUnicorn pHAT Hangs on "import unicornhat as unicorn"
@blacknova wrote: I have cloned the libraries and examples from git. Run the script setup.py install in rpi-ws281x and UnicornHat directories. Using print I have determined that the script reaches...
View ArticleNew PiCamera CAM003, dimensions?
@calleblyh wrote: I just ordered the new CAM003 for my PiZero.While waiting for delivery I would like to know how flexible is the flatcable as there are some componets soldered along the cable.Which...
View ArticleSerial console connection for Cluster HAT - what should I use?
@sjltech.uk wrote: Hello there,I am just about to try and put a Cluster HAT Pi setup together and would like to have the option to use serial connection.I see there's a serial connector on the Cluster...
View ArticleSpeaker PHat Questions
@jhb wrote: Hello, I have a Speaker Phat on my Pi 2, Questions: When I power the Pi from USB, the network crashes when I play a music file. Now I power thePi through the hat and all works fine. Is...
View ArticleDisplayotron menu code
@alwaysask wrote: Hi, The python code provided with the display-o-tron HAT is great for easily making menus and navigating them. The only thing I couldn't figure out is if there is a way to exit menu...
View ArticleClik here to view.
Hacking my motes
@Emma wrote: So... the mote sticks are too big to fit on my current project. I saw the thread about cutting mote sticks and may resort to doing that, but then I thought "Mote sticks are just APA102s,...
View ArticleDFRobot 2.8
@hmarks wrote: I would like to buy a DFRobot 2.8 TouchScreen because of the USB interface. However I would love to know if will work as a second monitor. I.e., if you I will be able to plug a general...
View ArticleInstructions for Picade PCB?
@PacManiac wrote: I'm trying to build a mini arcade cabinet using a Raspberry Pi 3 and RetroPie. I heard about the Picade kit and it looked really awesome, but I wanted a slightly larger screen so I...
View ArticleRasberry Pi Zero nothing works
@djoveryde wrote: Ok so i've just purchased a Rasberry Pi Zero from Pimoroni which arrived today.I have a Verbatim MicroSD HC Class 10 32GB. I have so far used Win32DiskImager, Etcher &...
View ArticleProblem with Three Port USB Hub with Ethernet/Realtek RTL8152
@jshardlow wrote: Hi, I recently purchased a few bits for a project. Unfortunately I've hit a bit of a problem. In short the Three Port USB Hub with Ethernet/Realtek RTL8152 (ADP003) on one of the Pi...
View ArticlePi Zero W, Pirate Radio and the PhatBeat - OS not supported
@Feek wrote: Hello folks, I've taken delivery of the spanky new Pirate Radio kit today along with a Pi Zero W and a Phatbeat module. I've built everything, downloaded the Volumio image (which required...
View ArticleExplorerHAT Pro Output issue
@Codeflare wrote: Hi, everyone! I recently purchased the ExplorerHAT PRO, and it is pretty cool, but I found that turning on the Outputs would not power an LED. After checking with a multimeter, my Pi...
View ArticleNew Pi Zero W only working @ 0.70Ghz
@mintyfpv wrote: Hi, Just got the new Pi Zero W from you guys today. Great quick delivery. Loaded it up with latest Pixel software. when i run the following:- cat...
View ArticlePie zero w retropie
@Lanky10 wrote: I bought a new pi zero w and it arrived yesterday very quick thanks. Unfortunately I am having some issues with it being a bit of a noob to this stuff I am not sure if I am doing this...
View ArticlePi zero w not working with retropie
@Lanky10 wrote: Sorry posted this in wrong forum.....I bought a new pi zero w and it arrived yesterday very quick thanks. Unfortunately I am having some issues with it being a bit of a noob to this...
View Article