PiBow Zero W doesn't fit raspberyy pi zero w
@Silver108 wrote: I already made a support ticket about this , but I was just wondering on whether I was actually in the wrong. I ordered a pi zero w and pibow zero w, and the pi zero w doesn’t fit...
View ArticlepHat Speacker - Volume control & Cracks at sound start
@moelski wrote: Hi ! I have my pHat Speaker now working for some days and Overall I´m happy with that product. But there are two things which are annoying: There is no volume Control over alsamixer...
View ArticleClik here to view.
Picade Vol+/- Buttons do not work
@barny wrote: Dear Pimoroni Team, I’ve finished to build my new Picade. Unfortunately the Volume +/- buttons do not work. I get sound from the board, but if I try to increase or lower the volume it...
View ArticleClik here to view.
Stacking Explorer Phat with Blinkt
@andywarburton wrote: AE91862C-CE8E-4A3B-BF72-2FD072CF411D.JPG4032x3024 1.89 MB Hi Pirates, I’m currently building a couple of Tiny 4WD rovers for my upcoming Pi Jam. So far it’s all working great, I...
View ArticleAdafruit stepper motor HAT python help?
@bowen73 wrote: Not sure if it’s the right place for this but I’ve had my stepper hat delivered and all is working fine and have it turning by a bipolar stepper motor, but need help getting more from...
View ArticlePantilthat _ use an external 5V supply for servos
@Smarties wrote: Has anybody found a way to easily modify the hat so as to use a seperate 5V supply for the servos? Configuration: Pi is powered from a LiPo, DC motors and LEDs powered from a NiMH...
View ArticleWeather:bit BME280 readings
@topshed wrote: I’ve been experimenting with the SparkFun weather:bit and can’t get the readings (temp, pressure and humidity) to update once an initial reading has been taken. I’ve been using the...
View ArticlePimoroni Hat HD not being seen with i2cdetect
@PeterRL wrote: Hi. Today I started to have a play with my new Unicorn Hat HD but as yet I have not got as much as a single blinking LED out of it. i have run the install script from curl...
View ArticleClik here to view.
PhatDac Install issues
@philspitler wrote: Hi, I have a Phat-Dac and I cannot seem to get any sound out of it. I followed these directions: Phat DAC install Support I've been following this guide...
View ArticleInkypHAT - show Google Calendar appointments
@Yerroon wrote: Dear forum-members, I just bought a RPi ZeroW and an InkypHAT and was planning to show some information on it. The weather should be no problem, the date should also be no problem but…...
View ArticleGPIO Ribbon Cable & Pi Zero W Compatability
@Phoenix_Z80 wrote: Can somebody tell my if the GPIO Ribbon Cable (CAB0505) will work with the Pi Zero W? I’m intending to use the ribbon cable to connect another device to the Pi Zero W. I’ve already...
View ArticleHyperPixel no backlight?
@povezi wrote: Hi, I have fresh retropie installation on Rpi2. installed using script HyperPixel, and I can see text but hardly (backlight is not turned on) tried this: root@retropie:/home/pi# echo...
View ArticleHyperpixel install/uninstall
@The_Handy_Andy wrote: If: curl https://get.pimoroni.com/hyperpixel | bash installs the HyperPixel screen, then what can I input to uninstall it? Would something similar to: ‘sudo apt-get purge...
View ArticlePianoHat capacitive touch extension
@7hyp3rPi wrote: Hi there Buccaneers! I have been searching this forum to see if anyone ever extended the capacitive touch on the PianoHat. What I’m trying to search for is if it’s possible to extend...
View ArticleUsing zero lipo with scroll bot kit
@7hyp3rPi wrote: I have bought the scroll bot kit recently and a zero lipo. Can I incorporate the zero lipo on this kit to use battery power? Will the scroll pHAT hd be using the same GPIO pins with...
View ArticlePi zero w unicorn phat pin connections
@bobbymalik wrote: I got my first phat unicorn with the mood kit. Unfortunately I soldered the pins in the wrong side (towards the light). I am no using the jumpers to connect the phat to pi zero w on...
View ArticlePirate Radio after update from Jessie to Stretch instable
@agu wrote: Never change a running system - my pirate radio need to be reinstalled with jessie for stability! It seems that the stretch distribution is not really stabile. After several reboots the...
View ArticlePantilthat and BCM16
@Smarties wrote: Is the HAT doing anything with BCM16? Is there a schematic for the HAT out there somewhere? With the HAT attached it appears to be affecting BCM16. I understand BCM16 by default is...
View ArticleOn off shim not shutdown
@manelto wrote: Hi! I put an on-off shim in a my raspberry pi with a pitft 3.5 and when push the button the raspberry on, but I don’t know how shutdown it. I press the button and nothing happens. Some...
View ArticleClik here to view.
Skywriter breakout issues
@emoryy wrote: Hi! I have the Skywriter HAT and the breakout board too. I recently began to try out these devices a few days ago, but I seem to have some issues. I made some videos, I linked to them...
View Article