Internet radio and Pi Zero W - unable to gain web access to VLC
@chrisF wrote: I have a Pirate Radio kit and have the basic internet radio functionality working fine. However, I want to access VLC via its http/web server interface, but I can’t connect no matter...
View ArticleCases compatible with Hyperpixel?
@BenH wrote: Hi folks, I’ve got a shiny new Hyperpixel to play with but I’d prefer to be using it in a case with the display mounted atop. Are any of the Pibow variants compatible with Hyperpixel?...
View ArticleButton shim / Pi zero questions
@The_Handy_Andy wrote: is the pcb the same thinkness as the pico hacker? also can you fit a Pi zero with a GPIO header fitted into the official Pi zero case where the pins come out of the bottom (red...
View ArticleHave the touchphat python library use smbus2 instead of python3-smbus
@cnx_coder wrote: i just started working on setting up my touchphat with a a rpi 3. now, many hours later and a few reinstallations, i have just learned the python3-smbus only works with python 3.4.2....
View ArticleClik here to view.
Hyperpixel standoff header
@johnmccabe wrote: Hi, I’ve misplaced the standoff header that came with my Hyperpixel and was going to pick up a new one, can you point me to the correct header to order on the site please? Is it...
View ArticleClik here to view.
Adventures in Minecraft problem
@Tobiman wrote: Hi, I got the adventures in Minecraft book and electronics kit. The Adafruit T-cobbler doesn’t match the one shown in the book so I’m having trouble completing the projects. Can you...
View ArticleSkywriter Hat and Google AIY Kit
@PalimPalim wrote: I looked at https://de.pinout.xyz/pinout/skywriter_hat and http://de.pinout.xyz/pinout/voice_hat . Both need pin 11 and 13. Is there any way I can use both at the same time. Can I...
View ArticlePirate Radio and loud click when change station on the VLC
@rz3dvp wrote: Hello, on last weekend I’m assembled my Pirate Radio (of course on jessie pi img) but have a problem with loud click when change station on VLC. How I can fix it? Thanks. Regards, Yuri...
View ArticleStack-able pHAT's - Automation and Inky
@jackjameshoward wrote: I want to use a ZeroW with the Automation pHAT. But I would also like a display so I was wondering if I could stack the Inky pHAT. Would this work? Thanks in advance Posts: 2...
View ArticleSpeaker pHAT + HDMI
@Cannikin wrote: I saw that installing the Speaker pHAT disables internal audio, but does that refer to only the onboard 3.5mm jack, or ALL audio, including HDMI? Ideally I want to get audio via HDMI...
View ArticleIs Node-RED support planned for Rainbow Hat?
@vitoriopimor wrote: Hello, I see https://github.com/pimoroni/node-red-nodes has Node-RED support for various other hats, but not for the Rainbow Hat. Is Node-RED support planned for the Rainbow Hat?...
View ArticleI2c analog input communication
@gve38 wrote: Hi, I’m writing a small C driver to use the raspberry pi zero, the explorer phat and the OS developed in my university. The only thing left is the control of the analog inputs. I saw on...
View ArticlePiradio Airplay Crackly/Buffering
@ParaAndyH1981 wrote: Hi, I’ve built and installed Airplay on the pirate radio but the sound is really crackly and it buffers every minute or so. I’ve got a good WiFi signal throughout my house and...
View ArticlePan Tilt HAT not tracking real faces just photos?
@edjones wrote: I have my Pan Tilt HAT all setup on my Raspi Zero W and it works tracking photos of peoples faces but when I put my mug (or my colleagues) in the frame it doesn’t “recognize” the face...
View ArticleClik here to view.
Speaker Phat sound diminished
@Jcmjcm wrote: Hi I seem to have a similar topic to Speaker pHAT sound deterioration Support After following the setup instructions for the "Adafruit MAX98357 I2S Class-D Mono Amp", I had this HAT...
View ArticleSpeaker pHAT and pHAT DAC won't work with omxplayer
@Alastair wrote: Has anybody worked out how to get Speaker pHAT and pHAT DAC working with omxplayer ? I have been struggling in vain to get them working for an installation I am building - but,...
View ArticleScroll Phat - Remote I/O error
@phpchap wrote: Hi there, this is my first RPI project and I’m having issues getting the scroll phat working :/ I’m using the hammerless solder kit and i’ve made sure all the connections are tight....
View ArticleSoldering advice for button shim, scroll phat hd, and using phat diffusor
@thediveo wrote: Is there any special advice on soldering a button shim and scroll phat hd onto the pins of a female GPIO extension header? Please note that I don’t solder them to the Pi’s header, but...
View ArticleArcade board: how do I configure buttons?
@shinyk wrote: Hi, I did purchase some time ago an arcade board from Adafruit, so I could make my own cabinet. I did install the wires and made the right solder joints, although I don’t understand how...
View ArticleAbout automation pHAT using outputs
@nico_themaire wrote: Hi, ( Refering to this post. ) I have some troubles with the Automation pHAT to understand the outputs use. I read the Gadgetoid post (in the link above), yes, but where to...
View Article