Clik here to view.
Pimoroni Explorer Hat Pro, Velleman HC-SR05 Ultrasonic Sensor
@koofi wrote: How do you connect the HC-SR05, to the Explorer Hat ? VCC - 5V Echo - ? TNG - ? OUT - ? GND - GND ExHatHC-SR05.jpg4170x2030 539 KB Posts: 4 Participants: 2 Read full topic
View ArticleHyperpixel on OSMC
@Nabla128k wrote: Hi, I try to test Kodi running on OSMC@Pi Zero W with Hyperpixel. I’ve already tested it with Raspbian, it’s working fine, but OSMC seems to be a little faster on Zero, so I like it...
View ArticleAutomation HAT and 24VDC
@Slothy2406 wrote: Just about to dive in to my first Pi project and I have obviously picked something a little difficult to to really test my programming and wiring skills. I am wanting to control an...
View ArticleCEC problem with Kodi
@jihun wrote: on my pi zero i’ve installed the osmc (open source media center 2017.10-1) but CEC doesn’t work, so i can’t use my tv remote control (LG TV). HDMI connected adaptors for the mini-HDMI...
View ArticleUnicorn Hat python script stops after 8+ hours
@ribotmaximus wrote: Hi all, I’m running a fresh install of Rasbian Stretch on a raspberry3 and running the example flame python file on the Unicorn Hat. It looks lovely, but after I come back into...
View ArticleAutomation HAT(s) with Black HAT Hack3r?
@boyerizm wrote: Howdy. Quick, maybe stupid, noob question for you guys. Possible to run two automation hats via the Black HAT Hack3r? I noted the command in the sample code is just...
View ArticleExplorer Hat Pro, Output.three, on all the time
@koofi wrote: I have a Raspberry Pi 3, Explorerhat Pro, and one led light on the breadboard. I can control all the outputs except for output three. Output three is on all the time. I have disconnected...
View ArticleBME680 Air Quality low?
@Mr_A wrote: Ok,so I’ve got the BME680 up and running and I’m really impressed so far. However, I’ve been using the example Python code indoor-air-quality.py located here but I’ve noticed that after...
View ArticleGoogle AIY voice kit - LEDs not lighting
@gb101 wrote: Have just assembled my kit, using an RPi 3. The audio and wifi tests work. Neither the LED on the Voice HAT nor the push button lights up. Troubleshooting info states: “(2) If the lamp...
View ArticlePiZ-Up Time: Battery size and software to use?
@T1nue wrote: Pimoroni provides the clean_shutdown software on Github for the Zero LiPO. The PIN used for the low power detection is configurable (trigger_pin). Would you see any problem in using this...
View ArticleScroll PhatHD: display upside down
@chorlton2080 wrote: Hello I added your updated examples from GitHub for my old Scroll PhatHD - now the clock display is upside-down! I can’t find anything in the clock.py file that might cause this,...
View ArticleClik here to view.
First time using input on Automation Phat
@davidn70 wrote: Hello, I have used the relay on the Automation Phats quite a bit. This is my first attempt at using the inputs. I am trying to connect the output of a piece of equipment to my...
View ArticleClik here to view.
Unicorn Hat HD SPI Timeout Problem
@insert_punchline wrote: Hi, I’m driving a Unicorn Hat HD with a Pi Zero (Raspian Jessie) and I get frequent SPI connection errors after approximately 20 seconds (time varies) whenever I run the...
View ArticleHyperPixel LCD with UPS hat?
@SolidSteve wrote: Hello! Would it be possible to run the HyperPixel screen with any UPS? I know most ups hats use i2c to monitor and shutdown pi. Thanks ahead of time! Posts: 1 Participants: 1 Read...
View ArticleFaulty OnOff-Shim?
@TedJ wrote: Soldered the OnOff-Shim to the header. Soldered a momentary button to the board. Attached the Shim to a Pi 3 and attached power. If I press and hold either button, the Pi will start. As...
View ArticleHas my pHAT DAC died
@Avvy60 wrote: I’ve been using the pHAT DAC for a few weeks now , and just lately the pin connections have become a bit on the loose side. When I plug the phone lead in to the output socket, sometimes...
View ArticleExtension wires for skywriter
@sgaluf wrote: Hello. I have Raspberry Pi stashed on top of my kitchen cabinets. I would like to have Skywriter hanging from the wall on the opposite side. About 3-4 meters of extension wires would be...
View ArticleClik here to view.
Problem binding inputs in MAME
@sjw2511 wrote: Hi, I’m having the exact same problem as this thread Picade Controller Bindings for RetroPie Using Latest Firmware Picade I've been wrestling with this particular issue for a couple of...
View ArticleI think my pi Zero w has died now
@Avvy60 wrote: Last night I connected the video and usb / lan cables , then the power cable. There was no video shown on a monitor, and no matter what I did , still no video. I then left it overnight,...
View ArticleProblem with adapter RPi Zero W
@ppetienne wrote: Hi everyone, I’ve just bought this adapter https://shop.pimoroni.com/products/three-port-usb-hub-with-ethernet-and-microb-connector and I have some problems to use the Ethernet port....
View Article