Automation pHat ADC Extra
@jswrigh wrote: The documentation says there is a third ADC “on the header.” Where, exactly? I’m measuring a voltage between 0 and 1.5 and the divider allowing 0-24 volt range is making the steps too...
View ArticleSkywriter Arduino Micro GPIO Pins
@glemau wrote: Hey, wich GPIO Pins are used for the Arduino Micro? Or where could I change these Pins? Posts: 2 Participants: 2 Read full topic
View Article[FEDORA - AARCH64 - error compiling ws281x]
@pfrenard wrote: Hello guys, I am trying to make a unicornhat work with fedora28 using aarch64. pip is not working with a compilation error, so I tried from a git clone. So the issue is from...
View ArticleAre any of the pins on the Rainbow Hat (Android Things) available as GPIO...
@loranbriggs wrote: Looking to control a relay from the Rainbow HAT and need access to a single pin to write high or low to control a relay. It looks like there are some other pins left over from the...
View ArticleClik here to view.
Problem drumhat with raspberry pi 1 A+
@nob wrote: I have problem with drumhat It doesn’t work when I run drums.py Please some help Thanks IMG_2510.JPG1512x2016 1.15 MB Posts: 1 Participants: 1 Read full topic
View ArticleRaspberry pi hardware diagnostic tools?
@sjwest wrote: two months ago i bought a raspberry pi during the pi sale so it is not the most recent pi. It during a raspberian update (apt) died with a kernel failure on boot after a month. So i set...
View ArticleOctocam with MotionEye OS kernel panics
@kai wrote: Hi, I’ve been trying to use the Octocam with the motionEye OS (as described in your tutorial https://learn.pimoroni.com/tutorial/sandyj/motioneye-os-on-your-octocam), but it’s constantly...
View ArticlePimoroni Automation HAT: understanding ADC
@metasyntactic wrote: I’m looking to drive my furnace with a raspberry pi. Pimoroni’s automation HAT looks ideal due to it’s low profile and the fact it has the exact number of relays I need. I’m a...
View ArticlePanTilt Hat extension
@simoselva wrote: Hello everyone, I’m new in the forum and in Raspberry, please to meet you. I need a simple (hopefully) information: Is possible to use some of the Raspberry Pins even with the...
View ArticleClik here to view.
pHat DAC + RBP w zero no sound
@Petitxef wrote: Hi everyone! First of all thank you for your help! Recently I bought a phat dac and a GPIO solderless (at thepihut) and I attached to my raspberry pi w Zero. I follow the instruction...
View Article[Blinkt LED strip] LEDs don't clear when the script is finished
@schickhydrobot wrote: As the title implies this post is concerning the Blinkt LED strip and the LEDs remaining active when the script is complete. I have imported RPi.GPIO into my python script and...
View ArticlePantilthat Python Import Problem
@redbarm wrote: I downloaded the Pantilthat software via Github, and followed the instructions. And all installation was successfull When I type “import Pantilthat”, I am receiving ImportError: No...
View ArticleClik here to view.
Skywritwer HAT and Arduino Help
@Balam wrote: I have a Skiwriter Hat ( for Pi) and been trying to use it with and Arduino need advice to make it work. I am fallowing this pins pinout.xyz Skywriter HAT at Raspberry Pi GPIO Pinout A...
View ArticleAdvice on new project and system
@Gizz wrote: OK so I have the following requirements: A device that has WS2812 LED strips in it and can detect acceleration to cause display of different light sequences, and which sequence is being...
View ArticleClik here to view.
Automation phat, how to set relay by gpio pins
@crizzis wrote: Hello, I have a problem with the automation phat. The libraries cleanup the gpio state, so when I switch the relay to on by python and execute the program, the relay will be turned off...
View ArticlePiano HAT Midi Issues
@CassandraC wrote: Hi there, I’m trying to get my Piano HAT running the midi-piano.py so that I can link it to Yoshimi. I can’t get the code to run in either Python 2 or 3. I think I’ve installed...
View ArticleClik here to view.
Blinkt fails after a week
@sipi wrote: I have a project that includes a Blinkt on a Raspberry Pi Zero W (with pre-soldered header). Everything worked perfectly for a week or so, but then the Blinkt just stopped working - ie no...
View ArticlePicade Hat Button Problems
@TheWonderer wrote: Hi there, just got your Picade-Hat and build an arcade with it. I got Problems mapping all my Buttons. Jostick work all. Start - Work Select - Work Power off - Work Button A - Work...
View ArticleHyperpixel & volumio
@craigjohnstone wrote: Hello, Do you know/has anyone managed to get hyperpixel to work alongside volumio? BW, Posts: 1 Participants: 1 Read full topic
View ArticleChanging the wifi network on priate radio
@feh123 wrote: Hi I have a Pimoroni Pirate Radio working on my home network. I was planning to take it on holiday. So I need to change the SSID/password. How do I do this? Thanks Posts: 7...
View Article