Quantcast
Channel: Support - Pimoroni Buccaneers
Browsing all 6926 articles
Browse latest View live

Hack3r or pHAT Stack as a bonnet?

@fazambuja wrote: Does any one know if the Mini Black HAT Hack3r or the pHAT Stack can be assembled as a bonnet? Instead of a long GPIO cable. Of course it will need a proper support to with some...

View Article


Step by step instructions - Drumhat

@AlisonPiMoron wrote: Hello, I am a complete pi novice. We bought my son a drum hat for his pi3 and have plugged it in and have tried to follow installation instructions but all seem to assume some...

View Article


HyperPixel - which GPIO pins actually used?

@davidmpride wrote: Hi, Fairly straightforward - does the HyperPixel just use SPI (or I2C?) and power / gnd? Can I therefore use the pico hat hacker and still access UART on 15 and 16? Many thanks,...

View Article

New to raspberry

@ejsrms wrote: i get this message when i run a script on python 3.5. i was using this pi zero as an ok to wake for our special needs child and it all of a sudden quit so i put this canned code in and...

View Article

Just got an Enviro Phat, a few basic questions

@LadderLogic wrote: Q1. I got an Enviro Phat at Microcenter in the USA, very excited. Strange question, but why does it say it’s only “compatible with 0 2 3 A+ B+” on the box. I’m assuming it’s...

View Article


Help me with my Skywriter project

@Thefirstav3nger wrote: Hello, I’ve been looking into making a door that is unlocked with a 4 gesture “pin” using the Skywriter and a raspberry pi. So my question is, is it possible to set up so the...

View Article

Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi

@Bonzadog1 wrote: The Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi looks interesting. Two Questions: Can one also perform a shutdown first when the on/off key is pressed. I think...

View Article

Pirate radio / Phat beat - power button stops working

@djrara wrote: Hi there, I have built the Pirate radio and installed the pimoroni script for using it as internet radio. Athough it’s my first soldering project and also the first raspbian project, it...

View Article


Enviro pHAT analog input question

@Gouf wrote: Could one of the Enviro pHAT’s analog inputs be used for a microphone to record speech? Or to encode as part of video from a Pi camera? Posts: 3 Participants: 2 Read full topic

View Article


Pimoroni Speaker pHAT sounds very raspy

@ChicDus wrote: Hi I hooked up the Pimoroni Speaker pHAT to a Raspberry Zero W. The speaker and LEDs work but the sound is very raspy. I checked the soldering 3 times in the speaker and on the Pi...

View Article

Phat Stack and Tracktion

@Outpost31d wrote: Hi I have a Phat stack with piano hat and drum hat and I would like run them as inputs for Tracktion waveform. It seems the only audio device selection is ALSA and JACK. I have my...

View Article

How to read from Automation Hat buffered input

@dcaccount wrote: Hello, I would like to configure mr Raspberry in order to receive an email when the main gate opens. I have signal coming from the gate, when the gate is open the signal is 12VCD,...

View Article

Skywriter XL only recognizes touch gestures

@KatzenKitty wrote: Hello! So, on the advice of a team member, I used the update.py script and I’ve now learned that is not suitable for the XL, it was only for the HAT version. Is there anything I...

View Article


Image may be NSFW.
Clik here to view.

Help PAM8302A

@medapayne wrote: Hello I badly need your help I own the amplifactor PAM8302 from Adafruit: MCHobby - Vente de Raspberry Pi, Arduino, ODROID, Adafruit Amplificateur 2.5W Mono - Class D - PAM8302 -...

View Article

Image may be NSFW.
Clik here to view.

PowerBoost 500 Charger and On/Off Switch

@MrScruff wrote: Hi All, In need of some technical help here! I am building a Raspberry Pi based tablet system and wanted a power button and battery so I could use it on the move. I bought a LipoPoly...

View Article


pHATBEAT Python script works in IDLE but not from command line

@Otto wrote: I’m wanting to make a standalone device that plays a .wav file when a button is pressed, using a pHATBEAT and a Pi Zero W. The simple Python 3 script I’ve written so far works fine when...

View Article

OSMC + Speaker pHAT

@amdwato wrote: Has anyone gotten the Speaker pHAT working with OSMC? When I try installing it I get an error that my OS is not supported, I was wondering if there’s any work around Posts: 3...

View Article


pHAT DAC ALSA error

@Lukas wrote: Hi folks, I just received my Raspi Zero W and the pHAT DAC, installed Raspbian Stretch Lite, changed the sudo user to a different name than pi and followed the tutorial to install the...

View Article

Unicorn Hat HD - Pi Zero W - Dead (grn) Pixel

@bgrundy wrote: Hi, I have a brand new Unicorn Hat HD (purchased from Adafruit). I wrote a binary clock program for it, and it all works fine, except a single “dead” pixel in the middle of the array....

View Article

Invert input reading on Automation Hat

@dcaccount wrote: Hello, as found here https://learn.pimoroni.com/tutorial/sandyj/getting-started-with-automation-hat-and-phat I have connected Automation Hat 5V to Input 1 and the reading is 1. Just...

View Article
Browsing all 6926 articles
Browse latest View live