Naturewatch camera kit
@paul1 wrote: Green led flashes then becomes solid, red led on cable solid but no wyfi detected by phone or wyfi analiser app. Any ideas Posts: 4 Participants: 2 Read full topic
View ArticleGPIO Expansion + PiHATs + Ribbon Cable
@ookjar wrote: Hi All I have a B+ with an expansion board (3 GPIO connectors), which when I plug a PiHat directly onto either of the three GPIO expansions works fine. Trouble is I need to take the...
View ArticleMy Track pad stopped working on my PiTop?
@ImmaCat wrote: Does anyone know what might be wrong? Posts: 1 Participants: 1 Read full topic
View ArticleOnOffShim wired away
@bborastero wrote: hi all I’ll jump straight in. Is it possible to connect the OnOff Shim to a Rpi Zero W with 5cm of cable so that it can be mounted out side of a casing? Also do all 12 pins need to...
View ArticleUsing DOT3K for weather forecast - few issues
@Mr_A wrote: I’ve been trying to put together a Python script that collects the weather forecast then displays the results on the Display-o-Tron 3000 and I’ve almost got it figured out. I forked a...
View ArticlePirate Radio Stops Working
@RMHirtle wrote: Hi, I bought a Pirate Radio Kit and have completed assembly and S/D card generation and update per the available instructions. Radio works well and all controls and functions appear...
View ArticleOfficial Raspberry Pi Universal Power Supply -- Raspberry Pi Model B
@rainmanh wrote: Hi, I am wondering whether the “Official Raspberry Pi Universal Power Supply” (https://shop.pimoroni.com/products/raspberry-pi-universal-power-supply) will work with a " Raspberry Pi...
View ArticleScroll phat wunderground
@g7kse wrote: Evening, I’m having a play with the scroll phat (Well Scroll Bot really) and wanted to use the Wunderground weather example. However, wunderground seem to hae stopped offering the free...
View ArticleClik here to view.
Enviro:bit sound
@okcomputing wrote: Hi, I’m trying to get the enviro:bit and micro:bit to report the sound level as a simple test I’ve uploaded a screen shot of the code in the blocks editor. It just keeps reporting...
View ArticleLED Shim Remote I/O error
@Blanchot wrote: Hi folks, Just received some of the new LED shims and after doing a full install via curl and making sure i2c is on I’m getting the following error in my code: ledshim.clear()...
View ArticleClik here to view.
HyperPixel - 3.5 no touch
@jofori wrote: Hi I just got my Hyperpixel today and ran the software following these instructions… GitHub pimoroni/hyperpixel hyperpixel - Setup for the Pimoroni Hyper Pixel 800x480 pixel multi-touch...
View ArticlePiHub Serious Fault
@PalaeoPi wrote: Hi, I plugged in my PiHub today, linking it to 3 Nikon cameras. After I plugged in the power supply it started smoking. What could have caused this? The hub is several years old,...
View ArticleAutomation pHat relay problems
@chrisF wrote: I am trying to use an automation pHat to activate a garage door opener. I’ve simply connected the two wires that run from the opener mechanism to the local “press for open/close” switch...
View ArticleUsing the Automation pHAT and Speaker pHAT at the same time
@Timon wrote: I need to be able to use the Automation pHat and the Speaker pHAT on the same project/Raspberry Zero W. This is currently a problem due to the pin conflict on GPIO pin 40. I already...
View ArticleOctocam woes!
@strickvl wrote: Hi, Got my octocam in the post today. Spent all afternoon trying to get the Wifi to work (long / complicated password caused problems) but now at least I know it’s connecting to the...
View ArticleBME680 Breakout
@strickvl wrote: Is there any way to use the BME680 without soldering things? I have a RPi 3 and a RPi Zero. If there’s any way to use it out of the packet/box, that’d be great. (I don’t know how to...
View ArticleStuck at the start
@Dave1958 wrote: Complete newby and incompetent here! I’m building the Nature Watch camera and following the instructions from the Nature Watch website. These instructions say to edit the...
View ArticleWindow mount/Octocam
@djdan00 wrote: I have a rapsberry pi zero with the mini camera but want to mount it to a window. Ideally I would like the octocam but without the pi etc just the mount. There is one other type of...
View ArticleUsing RPi.GPIO with the inkyphat library
@citlee wrote: Hi, I am using an inkyphat display with the inkyphat library installed via sudo apt-get install python3-inkyphat on a fresh install of the latest Raspbian Lite (2018-04-18 Stretch) on a...
View ArticleOnOffShim
@fscii wrote: I just got it and wanted to put it on a pizero that’s running PiHole with Adafruits OLED library on it (python, I2C library etc). I put it on and pulled the oled and I can get a red...
View Article