GPIO.add.event.detect alternative for Automation Hat input
@k.machacek wrote: Hello, I´m new newbie in programming Automation Hat in Python, and I would like to know how/or with replace GPIO.add.event.detect command in my python program? I have set some def...
View ArticleSpeaker pHAT with pi Zero WH
@ryancmiller wrote: Beginner here. Trying to figure out what the next step is for getting this up and running. I have soldering the speaker contacts to the other contacts, and would like to attach it...
View ArticleBME680 C Library
@dandrews wrote: Hi There! I’ve seen quite a few posts relating to the python library for this product, but none for C. If I use this on the arduino, do you know if it will work with adafruit’s...
View ArticleButton shim and audio control
@djdan00 wrote: I’m hoping to use the button shim to control pi musicbox. I can see there is a mopidy addon that allows GPIO control. Has anyone done this? Thanks Posts: 2 Participants: 2 Read full...
View ArticleEnviroPhat Questions
@Gouf wrote: I recently picked up an EnviroPhat. So I have a few questions: Can one use a ribbon cable to distance the phat from the Pi, to avoid thermal washout from the Pi CPU? Can the sensors on...
View ArticleCan No Longer Import Inkyphat
@TheRaggedFlygon wrote: I have recently been looking in to eInk and decided to begin with inkyphat. After playing around with inkyphat for 3 or so days, I decided to equip a different hat, but...
View ArticlePhatDac - No mopidy sound, but speaker-test works
@janlund wrote: Hi, I am trying to get mopidy/iris to work properly with PhatDac. (headless on Pi Zero W, Using a Pimoroni Noobs SD card, followed these instructions to get started with Spotify :...
View Article8 inch screen resolution
@Fitz43 wrote: What is the 8 inch screen resolution mine says 640 × 480 , looking at the forum people are saying 800 x 600 , new to using reaspberry pi so how do I change it to 800 x 600 as no option...
View ArticleBest IoT PubSub Platform
@jklondon wrote: Guys, Am experimenting with IoT. For my first project I delivered an Envirophat on Rapsberry Pi Zero W publishing out to Beebotte in real-time (thanks to @Mr_A and @alphanumeric ). I...
View ArticlePirate Radio CMD line stuck?
@fscii wrote: I got pirate radio vlc up and running via stretch lite although I Saw there’s some gui tools I plan on using it in the garage etc not with a keyboard and mouse. However sometimes I will....
View ArticleDisplay-o-Tron HAT addressing
@pd2 wrote: Display-o-Tron is working perfectly on a Pi3+. Piface 2 Digital io relay board is working perfectly on a Pi3+ When they are both connected the Display-o-Tron display is not updated, only...
View ArticleWide input shim doesn't power the Pi
@BlueWolf wrote: Hello there. I recently brought the Wide Input Shim to power a Raspberry Pi Zero straight from a 12v car battery. At first glance it seemed to work. When I connect it to the battery...
View ArticleAdafruit 128x64 OLED Bonnet - no display?
@PilgrimBeart wrote: I’m using this with a RPi Zero WH, all brand new from Pimoroni. I downloaded the Adafruit examples and I can: Read button-presses Detect that display is present on the I2C bus,...
View ArticleAutomationphat relay behaviour
@SandySound wrote: I have control of the relay, but when I issue a .on() command, it will only activate or stay open for as long as the sleep(x) function after it. I cannot get it to change to just be...
View ArticlePMS5003 -- how to use?
@strickvl wrote: I got my hands on one of these PMS5003 air quality devices that many people seem to be using a lot these days in projects. I have a Raspberry Pi and a Pi Zero (also an Arduino Uno). I...
View ArticleSyslog Info Message Owing to Blinkt
@baqwas wrote: I have Blinkt running on RPi0 W for several months now without visible issues. I enabled RSyslog on the platform and found that owing to Blinkt there is a pair of “Info” messages...
View ArticleBME680 - new board version?
@JohnH wrote: Hi - new here - have just taken delivery of my first Raspberry pi and a BME680 module that I want to use to monitor temp remotely. Pi is running fine but when I went solder up the BME680...
View ArticleAttempting to set up MotionEye OS
@Culagh wrote: I followed the instructions to set up motionEye OS on my OctoCam. I D/L’d the relevant raspberrypi Motion Eye os and wrote it to my sd card using Etcher. This where the confusion...
View ArticleRainbow Hat not working
@felipe.rce wrote: I tried to test my new Rainbow Hat on Android Things, but only the weather sensor are working. I can’t use the LED, visor, buttons… I tested using all google samples, and it won’t...
View ArticleHelp with dress for the weather project
@SIA wrote: Hi - I’ve been trying to do the dress for the weather project. https://projects.raspberrypi.org/en/projects/dress-for-the-weather/ I ran into an issue early on - the JSON list downloaded...
View Article