Piromoni o-tron HAT suddenly stop working on Raspberry, Pi 3 model B+ without...
@emanuele.piergallini wrote: Hi, I have a Raspberry, Pi 3 modello B+ bought on amazon and your piromoni o-tron HAT. Display works well for many days receiving data from my custom python program....
View ArticleOn Off shim - possible to shut off power to usb hub?
@andi.manuel wrote: Hi there, I’m running a Pi0 and other gadgets from a powered USB hub. Can I use the On Off shim to cut the power to the USB hub, to turn off (and on) everything by pressing the...
View ArticleAre Octocam Instrutions in error?
@pgmer6809 wrote: My Octocam fails to boot. It just spits out a bunch of text, then sends a Kill signal to all processes and thendoes it all over again. Is there a couple of errors in the instructions...
View ArticleSkywriter remote I/O error
@bebon901 wrote: when i use the ./test.py code for skywriter i get the following error: Traceback (most recent call last): File “/home/pi/Pimoroni/skywriter/examples/test.py”, line 2, in import...
View ArticleAdafruit PiOLED 128x32 Monochrome OLED - Could not open file i2c-1
@bradm wrote: Hi guys, I’m getting an error when trying to use the Adafruit PiOLED 128x32 Monochrome OLED. I’ve set everything up as per the instructions here and enabled I2C. I’m getting the...
View ArticleUsing Hyperpixel 3.5 with resin.io
@sega wrote: Hi, I’m trying you to use the display with the resin.io system on a Raspberry , but i can’t managed to get it work. I already tried the manual installation, but I can’t get the files in...
View ArticleUsing two bme680 sensors
@Geoman wrote: I want to connect two bme680 sensors to a raspberry pi zero. How do connect up two sensors to a Pi zero? In python how can I set up two sensors with a Pi zero? Thanks - geoman Posts: 2...
View ArticleClik here to view.
Picade scuffed perspex screen
@johnmccabe wrote: Hi, I received my new Picade this morning and started building over lunch and when assembling the screen I discovered that the main perspex screen piece was scuffed on one side....
View ArticleHow do I uninstall the onoffshim?
@PaxoParrot wrote: I just received the hyperpixel 4, and installed it on a Pi Zero-W which I previously had the onoffshim installed on. When I rebooted the screen, it’s all colour shifted and...
View ArticleCan you run a red/black/white Inky pHAT in black/white mode?
@skyhisi wrote: Is it possible to get a faster update on the red/black/white Inky pHAT by running it in black/white mode (with set_colour("black")), or will this cause damage to the unit? Posts: 1...
View ArticlePowering the new Picade
@johnmccabe wrote: Hi, I’ve been having bother powering the Picade successfully from the official 2.5A pi charger, when I hit the power button the screen powers on, displays no signal and retropie...
View ArticleMote stick problem only on phat
@veryalien wrote: I’ve got two mote sets, one with the usb dock and one with the mote phat. Exactly one of my 8 rgb mote sticks (bought from Pimoroni GmbH) has a ‘sticky’ red led, but only on the mote...
View ArticleNew Picade joystick not responding
@lff12 wrote: Hi all Assembled the new picade and mostly it works fine, eventually managed to start up retropie, connected a 2nd keyboard for configuration, but when I go to the input menu, it only...
View ArticleHyperpixel & Buttom SHIM : Compatible?
@FunkyPiwy wrote: Hi Everyone, I had a mad idea of trying to combine a Pi3b+ + the Button SHIM + The Hyperpixel 4 Tactile . After quite some time getting everything to fit together (having had to cut...
View ArticleClik here to view.
Display-o-Tron LCD wiring
@Jordan wrote: Hello, I’m starting a new project using a couple of 'Raspberry Pi Zero W’s and need a small display for them. I bought a Display-o-Tron LCD (no HAT or 3k), thinking that it would just...
View ArticleClik here to view.
Inky Phat on a Pi 3
@Prof wrote: I get terrible display quality when I try to use my new red Inky on a Pi 3 but it’s OK on a Pi zero W. Is the library doing some loop based timing somewhere? As a new user I can only post...
View ArticleClik here to view.
Extremely thin buttons
@Distortion wrote: Hello, I’m currently searching for extremely thin buttons, because the device i want to make should be as thin as possible. But everything i can find are those 7mm-10mm thick...
View ArticleClik here to view.
What I2S Stereo decoder should i use?
@Distortion wrote: Hello, for my project, I want to have aux output on a Raspberry Pi Zero. For that reason i searched for audio decoders and came across those four: eBay I2S PCM5102 DAC Decoder 32bit...
View ArticleClik here to view.
Unable to get camera to work with Pi Zero W
@TotalSpaceshipguy wrote: Hi I’m trying (and failing) to setup this camera … shop.pimoroni.com 70° Night vision camera module for Raspberry Pi – Pimoroni Light up the night with this night vision...
View ArticleUnicorn HAT HD board layout with dimensions
@davew_wu wrote: I purchase Unicorn HAT HD board a few weeks ago. I’d like to make a word clock project. I was looking for the board file (PDF is fine) with absolute and relative dimensions on screw...
View Article